• Reports by commit
  • Recent reports
  • Perl5 CoreSmokeDB
  • Changes
  • Smoke [smoke-me/tonyc/17268-yyl_try-recursion-test] v5.31.10-74-g8fc4f28f17 FAIL(F) dragonfly 5.8-RELEASE (x86_64/1 cpu)

    Subject: Smoke [smoke-me/tonyc/17268-yyl_try-recursion-test] v5.31.10-74-g8fc4f28f17 FAIL(F) dragonfly 5.8-RELEASE (x86_64/1 cpu)
    Date: Sun, 10 May 2020 12:57:36 -0500
    Message-Id: <5eb84090.14fb061.4d82f41@cjg-dragonfly5>
    
    Automated smoke report for branch smoke-me/tonyc/17268-yyl_try-recursion-test 5.31.11 patch 8fc4f28f17d7062b4400738f796902b81d39a70c v5.31.10-74-g8fc4f28f17
    cjg-dragonfly5: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (x86_64/1 cpu)
        on        dragonfly - 5.8-RELEASE
        using     gcc version 8.3 [DragonFly] Release/2019-02-22
        smoketime 8 hours 21 minutes (average 41 minutes 48 seconds)
    
    Summary: FAIL(F)
    
    O = OK  F = Failure(s), extended report at the bottom
    X = Failure(s) under TEST but not under harness
    ? = still running or test results not (yet) available
    Build failures during:       - = unknown or N/A
    c = Configure, m = make, M = make (after miniperl), t = make test-prep
    
    v5.31.10-74-g8fc4f28f17  Configuration (common) -Dcc=gcc
    ----------- ---------------------------------------------------------
    F F         
    F F         -Duse64bitall
    F F         -Duselongdouble
    F F         -Duseithreads
    F F         -Duseithreads -Duse64bitall
    F F         -Duseithreads -Duselongdouble
    | +--------- -DDEBUGGING
    +----------- no debugging
    
    
    Locally applied patches:
        SMOKE8fc4f28f17d7062b4400738f796902b81d39a70c
    
    Testsuite was run only with 'harness'
    
    Tests skipped on user request:
        # One test name on a line
    Failures: (common-args) -Dcc=gcc
    [default] 
    [default] -DDEBUGGING
    [default] -Duse64bitall
    [default] -DDEBUGGING -Duse64bitall
    [default] -Duselongdouble
    [default] -DDEBUGGING -Duselongdouble
    [default] -Duseithreads
    [default] -DDEBUGGING -Duseithreads
    [default] -Duseithreads -Duse64bitall
    [default] -DDEBUGGING -Duseithreads -Duse64bitall
    [default] -Duseithreads -Duselongdouble
    [default] -DDEBUGGING -Duseithreads -Duselongdouble
    ../t/io/fs.t................................................FAILED
        30-31, 36-37
    ../dist/Time-HiRes/t/utime.t................................FAILED
        2-3, 5-6, 12-15
        Non-zero exit status: 8
    ../ext/POSIX/t/termios.t....................................FAILED
        74, 76, 1589, 1591, 1593, 1595
        Non-zero exit status: 6
    
    MANIFEST did not declare '.mailmap'
    
    Compiler messages(gcc):
    sv.c: In function 'Perl_sv_vcatpvfn_flags':
    config.h:909:39: warning: '%.*g' directive writing between 1 and 133 bytes into a region of size 127 [-Wformat-overflow=]
    perl.h:6826:13: note: in definition of macro 'WITH_LC_NUMERIC_SET_TO_NEEDED_IN'
    sv.c:48:5: note: in expansion of macro 'PERL_UNUSED_RESULT'
    sv.c:48:24: note: in expansion of macro 'Gconvert'
    sv.c:13128:21: note: in expansion of macro 'SNPRINTF_G'
    config.h:909:39: note: assuming directive output of 132 bytes
    config.h:909:27: note: 'sprintf' output between 2 and 134 bytes into a destination of size 127
    DB_File.xs: In function 'ParseOpenInfo':
    DB_File.xs:476:44: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
    DB_File.xs:1044:13: note: in expansion of macro 'croak_and_free'
    DB_File.xs:1050:13: note: in expansion of macro 'croak_and_free'
    DB_File.xs:1056:17: note: in expansion of macro 'croak_and_free'
    DB_File.xs:1091:17: note: in expansion of macro 'croak_and_free'
    DB_File.xs:1140:17: note: in expansion of macro 'croak_and_free'
    DB_File.xs:1229:13: note: in expansion of macro 'croak_and_free'
    Socket.c: In function 'XS_Socket_pack_ip_mreq_source':
    Socket.c:1673:7: warning: variable 'interface' set but not used [-Wunused-but-set-variable]
    APItest.c: In function 'XS_XS__APItest__Magic_test_Gconvert':
    ../../config.h:909:39: warning: '%.*g' directive writing between 1 and 106 bytes into a region of size 100 [-Wformat-overflow=]
    ../../perl.h:496:67: note: in definition of macro 'PERL_UNUSED_RESULT'
    APItest.xs:6801:28: note: in expansion of macro 'Gconvert'
    ../../config.h:909:39: note: assuming directive output of 105 bytes
    ../../config.h:909:27: note: 'sprintf' output between 2 and 107 bytes into a destination of size 100
    config.h:909:39: warning: '%.*Lg' directive writing between 1 and 137 bytes into a region of size 130 [-Wformat-overflow=]
    config.h:909:40: note: format string is defined here
    config.h:909:39: note: assuming directive output of 136 bytes
    config.h:909:27: note: 'sprintf' output between 2 and 138 bytes into a destination of size 130
    ../../config.h:909:39: warning: '%.*Lg' directive writing between 1 and 107 bytes into a region of size 100 [-Wformat-overflow=]
    ../../config.h:909:39: note: assuming directive output of 106 bytes
    ../../config.h:909:27: note: 'sprintf' output between 2 and 108 bytes into a destination of size 100
    time64.c: In function 'Perl_localtime64_r':
    time64.c:573:30: warning: 'orig_year' may be used uninitialized in this function [-Wmaybe-uninitialized]
    Opcode.xs: In function 'opmask_addlocal':
    Opcode.xs:240:17: warning: cast between incompatible function types from 'void (*)(PerlInterpreter *, const char *, ...)' {aka 'void (*)(struct interpreter *, const char *, ...)'} to 'void (*)(void *)' [-Wcast-function-type]
    ../../embed.h:496:57: note: in definition of macro 'save_destructor'
    Opcode.xs:240:2: note: in expansion of macro 'SAVEDESTRUCTOR'
    
    Non-Fatal messages(gcc):
    
    
    
    -- 
    Report by Test::Smoke v1.71 running on perl 5.26.1
    (Reporter v0.053 / Smoker v0.046)