{"body":"","bodytext":"Automated smoke report for 5.15.0 patch b2af324d4531e01333f0687096a4ca1e8b780440 v5.15.0-541-gb2af324\nneptune.local: iMac (2.4 GHz) (Intel Core 2 Duo/1 cpu[2 cores])\n    on        darwin - 10.8.0 (Mac OS X)\n    using     g++ version 4.2.1 (Apple Inc. build 5646)\n    smoketime 1 hour 2 minutes (average 3 minutes 55.062 seconds)\n\nSummary: FAIL(Mm)\n\nO = OK  F = Failure(s), extended report at the bottom\nX = Failure(s) under TEST but not under harness\n? = still running or test results not (yet) available\nBuild failures during:       - = unknown or N/A\nc = Configure, m = make, M = make (after miniperl), t = make test-prep\n\nv5.15.0-541-gb2af324  Configuration (common) -Dcc=g++\n----------- ---------------------------------------------------------\nM - M -     \nM - M -     -Duse64bitint\nm - m -     -Dusedtrace\nM - M -     -Dusemorebits\nM - M -     -Duseithreads\nM - M -     -Duseithreads -Duse64bitint\nm - m -     -Duseithreads -Dusedtrace\nM - M -     -Duseithreads -Dusemorebits\n| | | +----- PERLIO = perlio -DDEBUGGING\n| | +------- PERLIO = stdio  -DDEBUGGING\n| +--------- PERLIO = perlio\n+----------- PERLIO = stdio\n\n\nLocally applied patches:\n    uncommitted-changes\n    SMOKEb2af324d4531e01333f0687096a4ca1e8b780440\n\nTestsuite was run only with 'harness' and HARNESS_OPTIONS=j3\n\nFailures: (common-args) -Dcc=g++\n[minitest] \n[minitest] -Duseithreads -Dusemorebits\n    t/comp/require..................FAILED--expected 51 tests, saw 47\n    t/run/fresh_perl................FAILED at test 75\n    t/io/perlio.....................FAILED--expected 44 tests, saw 42\n    t/io/utf8.......................FAILED at test 53\n    t/re/charset....................FAILED at test 685\n    t/re/pat........................FAILED at test 390\n    t/re/reg_mesg...................FAILED at test 106\n    t/re/reg_posixcc................FAILED at test 97\n    t/re/regexp.....................FAILED at test 118\n    t/re/regexp_noamp...............FAILED at test 118\n    t/re/regexp_notrie..............FAILED at test 118\n    t/re/regexp_qr..................FAILED at test 118\n    t/re/regexp_qr_embed............FAILED at test 118\n    t/re/regexp_trielist............FAILED at test 118\n    t/re/uniprops...................FAILED--no leader found\n    t/op/die........................FAILED at test 14\n    t/op/fresh_perl_utf8............FAILED at test 1\n    t/op/lc.........................FAILED--expected 93 tests, saw 25\n    t/op/lc_user....................FAILED--expected 5 tests, saw 0\n    t/op/pack.......................FAILED at test 14162\n\n[minitest] -DDEBUGGING\n[minitest] -DDEBUGGING -Duseithreads\n[minitest] -DDEBUGGING -Duseithreads -Dusemorebits\n    t/comp/require..................FAILED--expected 51 tests, saw 47\n    t/run/fresh_perl................FAILED at test 75\n    t/io/perlio.....................FAILED--expected 44 tests, saw 42\n    t/io/utf8.......................FAILED--expected 55 tests, saw 52\n    t/re/charset....................FAILED--no leader found\n    t/re/pat........................FAILED at test 390\n    t/re/pat_special_cc.............FAILED--expected 9 tests, saw 0\n    t/re/reg_mesg...................FAILED at test 106\n    t/re/reg_posixcc................FAILED--no leader found\n    t/re/regexp.....................FAILED at test 118\n    t/re/regexp_noamp...............FAILED at test 118\n    t/re/regexp_notrie..............FAILED at test 118\n    t/re/regexp_qr..................FAILED at test 118\n    t/re/regexp_qr_embed............FAILED at test 118\n    t/re/regexp_trielist............FAILED at test 118\n    t/re/uniprops...................FAILED--no leader found\n    t/op/die........................FAILED at test 14\n    t/op/fresh_perl_utf8............FAILED at test 1\n    t/op/lc.........................FAILED--expected 93 tests, saw 25\n    t/op/lc_user....................FAILED--expected 5 tests, saw 0\n    t/op/pack.......................FAILED at test 14162\n\n[minitest] -Duse64bitint\n    t/comp/require..................FAILED--expected 51 tests, saw 47\n    t/run/fresh_perl................FAILED at test 75\n    t/io/perlio.....................FAILED--expected 44 tests, saw 42\n    t/io/utf8.......................FAILED at test 53\n    t/re/charset....................FAILED at test 685\n    t/re/pat........................FAILED at test 390\n    t/re/reg_mesg...................FAILED at test 106\n    t/re/reg_posixcc................FAILED at test 97\n    t/re/regexp.....................FAILED at test 118\n    t/re/regexp_noamp...............FAILED at test 118\n    t/re/regexp_notrie..............FAILED at test 118\n    t/re/regexp_qr..................FAILED at test 118\n    t/re/regexp_qr_embed............FAILED at test 118\n    t/re/regexp_trielist............FAILED at test 118\n    t/re/uniprops...................FAILED--no leader found\n    t/op/die........................FAILED at test 14\n\n[minitest] -DDEBUGGING -Duse64bitint\n[minitest] -DDEBUGGING -Dusemorebits\n    t/comp/require..................FAILED--expected 51 tests, saw 47\n    t/run/fresh_perl................FAILED at test 75\n    t/io/perlio.....................FAILED--expected 44 tests, saw 42\n    t/io/utf8.......................FAILED--expected 55 tests, saw 52\n    t/re/charset....................FAILED--no leader found\n    t/re/pat........................FAILED at test 390\n    t/re/pat_special_cc.............FAILED--expected 9 tests, saw 0\n    t/re/reg_mesg...................FAILED at test 106\n    t/re/reg_posixcc................FAILED--no leader found\n    t/re/regexp.....................FAILED at test 118\n    t/re/regexp_noamp...............FAILED at test 118\n    t/re/regexp_notrie..............FAILED at test 118\n    t/re/regexp_qr..................FAILED at test 118\n    t/re/regexp_qr_embed............FAILED at test 118\n    t/re/regexp_trielist............FAILED at test 118\n    t/re/uniprops...................FAILED--no leader found\n    t/op/die........................FAILED at test 14\n    t/op/fresh_perl_utf8............FAILED at test 1\n    t/op/lc.........................FAILED--expected 93 tests, saw 25\n    t/op/lc_user....................FAILED--expected 5 tests, saw 0\n    t/op/pack.......................FAILED at test 14162\n    t/op/sprintf2...................FAILED at test 1320\n\n[minitest] -Dusemorebits\n[minitest] -DDEBUGGING -Duseithreads -Duse64bitint\n    t/comp/require..................FAILED--expected 51 tests, saw 47\n    t/io/perlio.....................FAILED--expected 44 tests, saw 42\n\n[minitest] -Duseithreads\n[minitest] -Duseithreads -Duse64bitint\n    t/comp/require..................FAILED--expected 51 tests, saw 47\n    t/run/fresh_perl................FAILED at test 75\n    t/io/perlio.....................FAILED--expected 44 tests, saw 42\n    t/io/utf8.......................FAILED at test 53\n    t/re/charset....................FAILED at test 685\n    t/re/pat........................FAILED at test 390\n    t/re/reg_mesg...................FAILED at test 106\n    t/re/reg_posixcc................FAILED at test 97\n    t/re/regexp.....................FAILED at test 118\n    t/re/regexp_noamp...............FAILED at test 118\n    t/re/regexp_notrie..............FAILED at test 118\n    t/re/regexp_qr..................FAILED at test 118\n    t/re/regexp_qr_embed............FAILED at test 118\n    t/re/regexp_trielist............FAILED at test 118\n    t/re/uniprops...................FAILED--no leader found\n\nCompiler messages(gcc):\npp_ctl.c: In function 'OP* Perl_pp_require()':\npp_ctl.c:3989: warning: suggest a space before ';' or explicit braces around empty body in 'while' statement\nperlmain.c: In function 'int main(int, char**, char**)':\nperlmain.c:89: error: expected `;' before '_fprintf_'\nperlmain.c:91: warning: statement has no effect\nperlmain.c:96: error: expected `;' before '_fprintf_'\nperlmain.c:98: warning: statement has no effect\npad.c: In function 'PADOFFSET S_pad_findlex(const char*, STRLEN, U32, const CV*, U32, int, SV**, SV**, int*)':\npad.c:1048: warning: field precision should have type 'int', but argument 4 has type 'STRLEN'\nperl.c: In function 'int perl_destruct(PerlInterpreter*)':\nperl.c:564: error: invalid conversion from 'const char* const' to 'char*'\nperl.c:564: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:564: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:759: error: invalid conversion from 'const char* const' to 'char*'\nperl.c:759: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:759: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c: In function 'int perl_parse(PerlInterpreter*, void (*)(), int, char**, char**)':\nperl.c:1608: error: invalid conversion from 'const char* const' to 'char*'\nperl.c:1608: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:1608: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:1626: error: invalid conversion from 'const char* const' to 'char*'\nperl.c:1626: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:1626: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c: In function 'void* S_parse_body(char**, void (*)())':\nperl.c:1775: error: invalid conversion from 'const char* const' to 'char*'\nperl.c:1775: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:1775: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c: In function 'int perl_run(PerlInterpreter*)':\nperl.c:2279: error: invalid conversion from 'const char* const' to 'char*'\nperl.c:2279: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:2279: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c: In function 'void S_run_body(I32)':\nperl.c:2331: error: invalid conversion from 'const char* const' to 'char*'\nperl.c:2331: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:2331: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:2341: error: invalid conversion from 'const char* const' to 'char*'\nperl.c:2341: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\nperl.c:2341: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'\npp_ctl.c: In function 'OP* Perl_pp_require(PerlInterpreter*)':\npad.c: In function 'PADOFFSET S_pad_findlex(PerlInterpreter*, const char*, STRLEN, U32, const CV*, U32, int, SV**, SV**, int*)':\nperl.c: In function 'int perl_parse(PerlInterpreter*, void (*)(PerlInterpreter*), int, char**, char**)':\nperl.c: In function 'void* S_parse_body(PerlInterpreter*, char**, void (*)(PerlInterpreter*))':\nperl.c: In function 'void S_run_body(PerlInterpreter*, I32)':\n\n-- \nReport by Test::Smoke v1.43 build 1271 running on perl 5.10.0\n(Reporter v0.035 / Smoker v0.045)\n\nLogs at http://perl.develop-help.com/reports/\nBranch: remotes/origin/smoke-me/rafl/assert-bincompat\nConfiguration: cpp\n","branch":"remotes/origin/smoke-me/rafl/assert-bincompat","build_hash":"J/devX/gpHASVUbE7cUd+dBh2sGRkfNCTVsE8lZZOk0","by_build_full":"neptune.local\ndarwin 10.8.0 (Mac OS X)\n-Dcc=g++\n-Dcc=g++ -Duse64bitint\n-Dcc=g++ -Dusedtrace\n-Dcc=g++ -Dusemorebits\n-Dcc=g++ -Duseithreads\n-Dcc=g++ -Duse64bitint -Duseithreads\n-Dcc=g++ -Dusedtrace -Duseithreads\n-Dcc=g++ -Duseithreads -Dusemorebits\n--\n3720\n","by_config_full":"neptune.local\ndarwin 10.8.0 (Mac OS X)\n-Dcc=g++\n-Dcc=g++ -Duse64bitint\n-Dcc=g++ -Dusedtrace\n-Dcc=g++ -Dusemorebits\n-Dcc=g++ -Duseithreads\n-Dcc=g++ -Duse64bitint -Duseithreads\n-Dcc=g++ -Dusedtrace -Duseithreads\n-Dcc=g++ -Duseithreads -Dusemorebits\n","compiler":"g++ 4.2.1 (Apple Inc. build 5646)","compiler_msgs":["pp_ctl.c: In function 'OP* Perl_pp_require()':","pp_ctl.c:3989: warning: suggest a space before ';' or explicit braces around empty body in 'while' statement","perlmain.c: In function 'int main(int, char**, char**)':","perlmain.c:89: error: expected `;' before '_fprintf_'","perlmain.c:91: warning: statement has no effect","perlmain.c:96: error: expected `;' before '_fprintf_'","perlmain.c:98: warning: statement has no effect","pad.c: In function 'PADOFFSET S_pad_findlex(const char*, STRLEN, U32, const CV*, U32, int, SV**, SV**, int*)':","pad.c:1048: warning: field precision should have type 'int', but argument 4 has type 'STRLEN'","perl.c: In function 'int perl_destruct(PerlInterpreter*)':","perl.c:564: error: invalid conversion from 'const char* const' to 'char*'","perl.c:564: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:564: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:759: error: invalid conversion from 'const char* const' to 'char*'","perl.c:759: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:759: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c: In function 'int perl_parse(PerlInterpreter*, void (*)(), int, char**, char**)':","perl.c:1608: error: invalid conversion from 'const char* const' to 'char*'","perl.c:1608: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:1608: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:1626: error: invalid conversion from 'const char* const' to 'char*'","perl.c:1626: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:1626: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c: In function 'void* S_parse_body(char**, void (*)())':","perl.c:1775: error: invalid conversion from 'const char* const' to 'char*'","perl.c:1775: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:1775: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c: In function 'int perl_run(PerlInterpreter*)':","perl.c:2279: error: invalid conversion from 'const char* const' to 'char*'","perl.c:2279: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:2279: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c: In function 'void S_run_body(I32)':","perl.c:2331: error: invalid conversion from 'const char* const' to 'char*'","perl.c:2331: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:2331: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:2341: error: invalid conversion from 'const char* const' to 'char*'","perl.c:2341: error:   initializing argument 1 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","perl.c:2341: error:   initializing argument 2 of 'void __dtrace_probe$perl$phase__change$v1$63686172202a$63686172202a(char*, char*)'","pp_ctl.c: In function 'OP* Perl_pp_require(PerlInterpreter*)':","pad.c: In function 'PADOFFSET S_pad_findlex(PerlInterpreter*, const char*, STRLEN, U32, const CV*, U32, int, SV**, SV**, int*)':","perl.c: In function 'int perl_parse(PerlInterpreter*, void (*)(PerlInterpreter*), int, char**, char**)':","perl.c: In function 'void* S_parse_body(PerlInterpreter*, char**, void (*)(PerlInterpreter*))':","perl.c: In function 'void S_run_body(PerlInterpreter*, I32)':"],"conf1":["-Dcc=g++","-Dcc=g++ -Duse64bitint","-Dcc=g++ -Dusedtrace","-Dcc=g++ -Dusemorebits","-Dcc=g++ -Duseithreads","-Dcc=g++ -Duse64bitint -Duseithreads","-Dcc=g++ -Dusedtrace -Duseithreads","-Dcc=g++ -Duseithreads -Dusemorebits"],"conf1_struct":{"common":["-Dcc=g++"],"extra":[[],["-Duse64bitint"],["-Dusedtrace"],["-Dusemorebits"],["-Duseithreads"],["-Duse64bitint","-Duseithreads"],["-Dusedtrace","-Duseithreads"],["-Duseithreads","-Dusemorebits"]]},"config_hash":"oBGSNBKXIcL1uj+9x7zse8wmU8/kAdtTaFW6VY31h1A","configuration":"cpp","cpu":"Intel Core 2 Duo","cpu_count":2,"cpu_full":"iMac (2.4 GHz) (Intel Core 2 Duo/1 cpu[2 cores])","duration":3720,"error":"","from_email":"tony@develop-help.com","host":"neptune.local","matrix":["v5.15.0-541-gb2af324  Configuration (common) -Dcc=g++","----------- ---------------------------------------------------------","M - M -     ","M - M -     -Duse64bitint","m - m -     -Dusedtrace","M - M -     -Dusemorebits","M - M -     -Duseithreads","M - M -     -Duseithreads -Duse64bitint","m - m -     -Duseithreads -Dusedtrace","M - M -     -Duseithreads -Dusemorebits","| | | +----- PERLIO = perlio -DDEBUGGING","| | +------- PERLIO = stdio  -DDEBUGGING","| +--------- PERLIO = perlio","+----------- PERLIO = stdio"],"msg_id":"<201207182051.q6IKpsSY000931@mars.tony.develop-help.com>","nonfatal_msgs":[],"os":"darwin 10.8.0 (Mac OS X)","osname":"darwin","osversion":"10.8.0 (Mac OS X)","sha":"b2af324d4531e01333f0687096a4ca1e8b780440","status":"FAIL(Mm)","subject":"Smoke [5.15.0] v5.15.0-541-gb2af324 FAIL(Mm) darwin 10.8.0 (Intel Core 2 Duo/1 cpu[2 cores])","when_at":"2012-07-18T20:51:00"}