{"body":"","bodytext":"Automated smoke report for 5.17.4 patch 4ab7cbc880156236df39ea8163d6778ae1c123a1 v5.17.3-295-g4ab7cbc\nopenbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (2981 MHz) (amd64/2 cpu)\n    on        openbsd - 4.7\n    using     cc version 3.3.5 (propolice)\n    smoketime 3 hours 30 minutes (average 26 minutes 20 seconds)\n\nSummary: FAIL(m)\n\nO = OK  F = Failure(s), extended report at the bottom\nX = Failure(s) under TEST but not under harness\n? = still running or test results not (yet) available\nBuild failures during:       - = unknown or N/A\nc = Configure, m = make, M = make (after miniperl), t = make test-prep\n\nv5.17.3-295-g4ab7cbc  Configuration (common) none\n----------- ---------------------------------------------------------\nO O O O     \nO O O O     -Duse64bitint\nm - m -     -Duseithreads\nm - m -     -Duseithreads -Duse64bitint\n| | | +----- PERLIO = perlio -DDEBUGGING\n| | +------- PERLIO = stdio  -DDEBUGGING\n| +--------- PERLIO = perlio\n+----------- PERLIO = stdio\n\n\nLocally applied patches:\n    uncommitted-changes\n    SMOKE4ab7cbc880156236df39ea8163d6778ae1c123a1\n\nTestsuite was run only with 'harness' and HARNESS_OPTIONS=j3\n\nPassed Todo tests: (common-args) none\n[stdio/perlio] \n[stdio/perlio] -DDEBUGGING\n[stdio/perlio] -Duse64bitint\n[stdio/perlio] -DDEBUGGING -Duse64bitint\n../cpan/CGI/t/tmpdir.t......................................PASSED\n    3-9\n\nCompiler messages(gcc):\n/tmp//ccy0nKtr.o(.text+0x4c): In function `main':\n/tmp//ccJymM9Y.o(.text+0x78): In function `main':\n/tmp//ccHEXpBT.o(.text+0x9d): In function `xxx':\n/tmp//ccttrgxW.o(.text+0xc4): In function `main':\nregcomp.c: In function `Perl_re_op_compile':\nregcomp.c:5324: warning: variable `runtime_code' might be clobbered by `longjmp' or `vfork'\nregcomp.o(.text+0x13efa): In function `S_regclass':\nlibperl.a(DynaLoader.o)(.text+0x304): In function `XS_DynaLoader_dl_load_file':\nlibperl.a(regcomp.o)(.text+0x13efa): In function `S_regclass':\n<command line>:12:1: warning: \"TIME_HIRES_STAT\" redefined\n<command line>:11:1: warning: this is the location of the previous definition\n<command line>:13:1: warning: \"TIME_HIRES_STAT\" redefined\n<command line>:12:1: warning: this is the location of the previous definition\nutil.o(.text+0x1a9): In function `savestr':\nstr.o(.text+0x70): In function `str_2ptr':\n../libperl.a(sv.o)(.text+0x2877): In function `Perl_sv_2pv_flags':\n/tmp//ccgxma3V.o(.text+0x4c): In function `main':\n/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is often misused, please use snprintf()\n/tmp//ccEAbuqY.o(.text+0x78): In function `main':\n/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is often misused, please use snprintf()\n/tmp//ccv9B0KH.o(.text+0x9d): In function `xxx':\n/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()\n/tmp//ccqqlkpT.o(.text+0xc4): In function `main':\n/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()\nregcomp.o(.text+0x2a70a): In function `S_regclass':\n/home/perlsmoke/smoke-me/perl-current/regcomp.c:11616: warning: sprintf() is often misused, please use snprintf()\nlibperl.a(DynaLoader.o)(.text+0x55c): In function `XS_DynaLoader_dl_load_file':\n/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: warning: strcat() is almost always misused, please use strlcat()\nlibperl.a(regcomp.o)(.text+0x2a70a): In function `S_regclass':\n<command line>:14:1: warning: \"TIME_HIRES_STAT\" redefined\n<command line>:13:1: warning: this is the location of the previous definition\n<command line>:15:1: warning: \"TIME_HIRES_STAT\" redefined\n<command line>:14:1: warning: this is the location of the previous definition\nutil.o(.text+0x2a9): In function `savestr':\n/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()\nstr.o(.text+0x95): In function `str_2ptr':\n/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()\n../libperl.a(sv.o)(.text+0xa79e): In function `Perl_sv_2pv_flags':\n/home/perlsmoke/smoke-me/perl-current/sv.c:2899: warning: sprintf() is often misused, please use snprintf()\n/tmp//ccRn1ybf.o(.text+0x4c): In function `main':\n/tmp//ccdS2An5.o(.text+0x78): In function `main':\n/tmp//cczOUSfv.o(.text+0x9d): In function `xxx':\n/tmp//ccI6JpMN.o(.text+0xc4): In function `main':\n/tmp//ccCF2AMg.o(.text+0x4c): In function `main':\n/tmp//ccQGvbh0.o(.text+0x78): In function `main':\n/tmp//ccWEFHQ8.o(.text+0x9d): In function `xxx':\n/tmp//ccH2JSUD.o(.text+0xc4): In function `main':\n/tmp//cceNkO7t.o(.text+0x4c): In function `main':\n/tmp//ccNgxrbM.o(.text+0x78): In function `main':\n/tmp//cc9hOkIT.o(.text+0x9d): In function `xxx':\n/tmp//ccYDjwKT.o(.text+0xc4): In function `main':\nmalloc.c: In function `morecore':\nmalloc.c:1714: error: `my_perl' undeclared (first use in this function)\nmalloc.c:1714: error: (Each undeclared identifier is reported only once\nmalloc.c:1714: error: for each function it appears in.)\n/tmp//ccCNPr83.o(.text+0x4c): In function `main':\n/tmp//ccS2cK6B.o(.text+0x78): In function `main':\n/tmp//cc01OyPM.o(.text+0x9d): In function `xxx':\n/tmp//ccXIp2N1.o(.text+0xc4): In function `main':\n/tmp//ccofOkrS.o(.text+0x4c): In function `main':\n/tmp//cc69YzTn.o(.text+0x78): In function `main':\n/tmp//ccHbSV0Z.o(.text+0x9d): In function `xxx':\n/tmp//ccnvIvCY.o(.text+0xc4): In function `main':\n/tmp//ccMliP0Q.o(.text+0x4c): In function `main':\n/tmp//ccCNaun8.o(.text+0x78): In function `main':\n/tmp//ccGi8UZF.o(.text+0x9d): In function `xxx':\n/tmp//ccmW4ayt.o(.text+0xc4): In function `main':\n\n-- \nReport by Test::Smoke v1.44 build 1285 running on perl 5.10.1\n(Reporter v0.035 / Smoker v0.045)\n\nLogs at http://perl.develop-help.com/reports/\nBranch: remotes/origin/smoke-me/stack_optimization\nConfiguration: default\n","branch":"remotes/origin/smoke-me/stack_optimization","build_hash":"d9HSOi+wSV1CyuwCieOKEQkRpOQmOZ+38KvCnDH7/Po","by_build_full":"openbsd64.tony.develop-help.com\nopenbsd 4.7\n\n-Duse64bitint\n-Duseithreads\n-Duse64bitint -Duseithreads\n--\n12600\n","by_config_full":"openbsd64.tony.develop-help.com\nopenbsd 4.7\n\n-Duse64bitint\n-Duseithreads\n-Duse64bitint -Duseithreads\n","compiler":"cc 3.3.5 (propolice)","compiler_msgs":["/tmp//ccy0nKtr.o(.text+0x4c): In function `main':","/tmp//ccJymM9Y.o(.text+0x78): In function `main':","/tmp//ccHEXpBT.o(.text+0x9d): In function `xxx':","/tmp//ccttrgxW.o(.text+0xc4): In function `main':","regcomp.c: In function `Perl_re_op_compile':","regcomp.c:5324: warning: variable `runtime_code' might be clobbered by `longjmp' or `vfork'","regcomp.o(.text+0x13efa): In function `S_regclass':","libperl.a(DynaLoader.o)(.text+0x304): In function `XS_DynaLoader_dl_load_file':","libperl.a(regcomp.o)(.text+0x13efa): In function `S_regclass':","<command line>:12:1: warning: \"TIME_HIRES_STAT\" redefined","<command line>:11:1: warning: this is the location of the previous definition","<command line>:13:1: warning: \"TIME_HIRES_STAT\" redefined","<command line>:12:1: warning: this is the location of the previous definition","util.o(.text+0x1a9): In function `savestr':","str.o(.text+0x70): In function `str_2ptr':","../libperl.a(sv.o)(.text+0x2877): In function `Perl_sv_2pv_flags':","/tmp//ccgxma3V.o(.text+0x4c): In function `main':","/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is often misused, please use snprintf()","/tmp//ccEAbuqY.o(.text+0x78): In function `main':","/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is often misused, please use snprintf()","/tmp//ccv9B0KH.o(.text+0x9d): In function `xxx':","/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()","/tmp//ccqqlkpT.o(.text+0xc4): In function `main':","/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()","regcomp.o(.text+0x2a70a): In function `S_regclass':","/home/perlsmoke/smoke-me/perl-current/regcomp.c:11616: warning: sprintf() is often misused, please use snprintf()","libperl.a(DynaLoader.o)(.text+0x55c): In function `XS_DynaLoader_dl_load_file':","/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: warning: strcat() is almost always misused, please use strlcat()","libperl.a(regcomp.o)(.text+0x2a70a): In function `S_regclass':","<command line>:14:1: warning: \"TIME_HIRES_STAT\" redefined","<command line>:13:1: warning: this is the location of the previous definition","<command line>:15:1: warning: \"TIME_HIRES_STAT\" redefined","<command line>:14:1: warning: this is the location of the previous definition","util.o(.text+0x2a9): In function `savestr':","/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()","str.o(.text+0x95): In function `str_2ptr':","/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()","../libperl.a(sv.o)(.text+0xa79e): In function `Perl_sv_2pv_flags':","/home/perlsmoke/smoke-me/perl-current/sv.c:2899: warning: sprintf() is often misused, please use snprintf()","/tmp//ccRn1ybf.o(.text+0x4c): In function `main':","/tmp//ccdS2An5.o(.text+0x78): In function `main':","/tmp//cczOUSfv.o(.text+0x9d): In function `xxx':","/tmp//ccI6JpMN.o(.text+0xc4): In function `main':","/tmp//ccCF2AMg.o(.text+0x4c): In function `main':","/tmp//ccQGvbh0.o(.text+0x78): In function `main':","/tmp//ccWEFHQ8.o(.text+0x9d): In function `xxx':","/tmp//ccH2JSUD.o(.text+0xc4): In function `main':","/tmp//cceNkO7t.o(.text+0x4c): In function `main':","/tmp//ccNgxrbM.o(.text+0x78): In function `main':","/tmp//cc9hOkIT.o(.text+0x9d): In function `xxx':","/tmp//ccYDjwKT.o(.text+0xc4): In function `main':","malloc.c: In function `morecore':","malloc.c:1714: error: `my_perl' undeclared (first use in this function)","malloc.c:1714: error: (Each undeclared identifier is reported only once","malloc.c:1714: error: for each function it appears in.)","/tmp//ccCNPr83.o(.text+0x4c): In function `main':","/tmp//ccS2cK6B.o(.text+0x78): In function `main':","/tmp//cc01OyPM.o(.text+0x9d): In function `xxx':","/tmp//ccXIp2N1.o(.text+0xc4): In function `main':","/tmp//ccofOkrS.o(.text+0x4c): In function `main':","/tmp//cc69YzTn.o(.text+0x78): In function `main':","/tmp//ccHbSV0Z.o(.text+0x9d): In function `xxx':","/tmp//ccnvIvCY.o(.text+0xc4): In function `main':","/tmp//ccMliP0Q.o(.text+0x4c): In function `main':","/tmp//ccCNaun8.o(.text+0x78): In function `main':","/tmp//ccGi8UZF.o(.text+0x9d): In function `xxx':","/tmp//ccmW4ayt.o(.text+0xc4): In function `main':"],"conf1":["","-Duse64bitint","-Duseithreads","-Duse64bitint -Duseithreads"],"conf1_struct":{"common":[],"extra":[[],["-Duse64bitint"],["-Duseithreads"],["-Duse64bitint","-Duseithreads"]]},"config_hash":"agpY4ZEVTJdVJJnYCxxlUG/o83u1ke4UjqjhxgP1v7I","configuration":"default","cpu":"amd64","cpu_count":2,"cpu_full":"Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (2981 MHz) (amd64/2 cpu)","duration":12600,"error":"","from_email":"tony@develop-help.com","host":"openbsd64.tony.develop-help.com","matrix":["v5.17.3-295-g4ab7cbc  Configuration (common) none","----------- ---------------------------------------------------------","O O O O     ","O O O O     -Duse64bitint","m - m -     -Duseithreads","m - m -     -Duseithreads -Duse64bitint","| | | +----- PERLIO = perlio -DDEBUGGING","| | +------- PERLIO = stdio  -DDEBUGGING","| +--------- PERLIO = perlio","+----------- PERLIO = stdio"],"msg_id":"<201209150335.q8F3Zpu0000725@mars.tony.develop-help.com>","nonfatal_msgs":[],"os":"openbsd 4.7","osname":"openbsd","osversion":"4.7","sha":"4ab7cbc880156236df39ea8163d6778ae1c123a1","status":"FAIL(m)","subject":"Smoke [5.17.4] v5.17.3-295-g4ab7cbc FAIL(m) openbsd 4.7 (amd64/2 cpu)","when_at":"2012-09-15T03:07:00"}