{"body":"","bodytext":"Automated smoke report for 5.17.5 patch 2ab171cf81a5b3a36eeb116587a7b6d28135f0f7 v5.17.4-308-g2ab171c\nmars: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (GenuineIntel 1596MHz) (x86_64/4 cpu)\n    on        linux - 2.6.32-5-amd64 [debian]\n    using     /opt/gcc-4.6.0/bin/gcc version 4.6.0\n    smoketime 11 minutes 42 seconds (average 58.500 seconds)\n\nSummary: FAIL(m)\n\nO = OK  F = Failure(s), extended report at the bottom\nX = Failure(s) under TEST but not under harness\n? = still running or test results not (yet) available\nBuild failures during:       - = unknown or N/A\nc = Configure, m = make, M = make (after miniperl), t = make test-prep\n\nv5.17.4-308-g2ab171c  Configuration (common) -Dcc=/opt/gcc-4.6.0/bin/gcc\n----------- ---------------------------------------------------------\nm - - m - - \nm - - m - - -Duselongdouble\nm - - m - - -Dmad\nm - - m - - -Duseithreads\nm - - m - - -Duseithreads -Duselongdouble\nm - - m - - -Duseithreads -Dmad\n| | | +----- PERLIO = perlio -DDEBUGGING\n| | +------- PERLIO = stdio  -DDEBUGGING\n| +--------- PERLIO = perlio\n+----------- PERLIO = stdio\n\n\nLocally applied patches:\n    uncommitted-changes\n    SMOKE2ab171cf81a5b3a36eeb116587a7b6d28135f0f7\n\nTestsuite was run only with 'harness' and HARNESS_OPTIONS=j4\n\nCompiler messages(gcc):\nregcomp.c: In function ‘S_regclass’:\nregcomp.c:12654:20: warning: variable ‘f’ set but not used [-Wunused-but-set-variable]\nregcomp.c:11451:10: warning: variable ‘allow_full_fold’ set but not used [-Wunused-but-set-variable]\nregcomp.c:12147:9: warning: ‘prevvalue’ may be used uninitialized in this function [-Wuninitialized]\nregexec.c: In function ‘S_setup_EXACTISH_ST_c1_c2’:\nregexec.c:3451:23: error: expected expression before ‘/’ token\nregexec.c:3331:15: warning: unused variable ‘uniflags’ [-Wunused-variable]\nregexec.c: In function ‘S_reginclass’:\nregexec.c:7251:12: warning: variable ‘maxlen’ set but not used [-Wunused-but-set-variable]\ntoke.c: In function ‘Perl_yylex’:\ntoke.c:8303:19: warning: variable ‘have_proto’ set but not used [-Wunused-but-set-variable]\ntoke.c:8301:11: warning: variable ‘tboffset’ set but not used [-Wunused-but-set-variable]\n\n-- \nReport by Test::Smoke v1.43 build 1271 running on perl 5.10.1\n(Reporter v0.035 / Smoker v0.045)\n\nLogs at http://perl.develop-help.com/reports/\nBranch: remotes/origin/smoke-me/khw-foldbug\nConfiguration: gcc460\n","branch":"remotes/origin/smoke-me/khw-foldbug","build_hash":"m9MkUtYX5sZigSyTNld/64yy3bB3tcyyhVjZSe47cZw","by_build_full":"mars\nlinux 2.6.32-5-amd64 [debian]\n-Dcc=/opt/gcc-4.6.0/bin/gcc\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Duselongdouble\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Dmad\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Duseithreads\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Duseithreads -Duselongdouble\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Dmad -Duseithreads\n--\n660\n","by_config_full":"mars\nlinux 2.6.xx-amd64 [debian]\n-Dcc=/opt/gcc-4.6.0/bin/gcc\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Duselongdouble\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Dmad\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Duseithreads\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Duseithreads -Duselongdouble\n-Dcc=/opt/gcc-4.6.0/bin/gcc -Dmad -Duseithreads\n","compiler":"/opt/gcc-4.6.0/bin/gcc 4.6.0","compiler_msgs":["regcomp.c: In function ‘S_regclass’:","regcomp.c:12654:20: warning: variable ‘f’ set but not used [-Wunused-but-set-variable]","regcomp.c:11451:10: warning: variable ‘allow_full_fold’ set but not used [-Wunused-but-set-variable]","regcomp.c:12147:9: warning: ‘prevvalue’ may be used uninitialized in this function [-Wuninitialized]","regexec.c: In function ‘S_setup_EXACTISH_ST_c1_c2’:","regexec.c:3451:23: error: expected expression before ‘/’ token","regexec.c:3331:15: warning: unused variable ‘uniflags’ [-Wunused-variable]","regexec.c: In function ‘S_reginclass’:","regexec.c:7251:12: warning: variable ‘maxlen’ set but not used [-Wunused-but-set-variable]","toke.c: In function ‘Perl_yylex’:","toke.c:8303:19: warning: variable ‘have_proto’ set but not used [-Wunused-but-set-variable]","toke.c:8301:11: warning: variable ‘tboffset’ set but not used [-Wunused-but-set-variable]"],"conf1":["-Dcc=/opt/gcc-4.6.0/bin/gcc","-Dcc=/opt/gcc-4.6.0/bin/gcc -Duselongdouble","-Dcc=/opt/gcc-4.6.0/bin/gcc -Dmad","-Dcc=/opt/gcc-4.6.0/bin/gcc -Duseithreads","-Dcc=/opt/gcc-4.6.0/bin/gcc -Duseithreads -Duselongdouble","-Dcc=/opt/gcc-4.6.0/bin/gcc -Dmad -Duseithreads"],"conf1_struct":{"common":["-Dcc=/opt/gcc-4.6.0/bin/gcc"],"extra":[[],["-Duselongdouble"],["-Dmad"],["-Duseithreads"],["-Duseithreads","-Duselongdouble"],["-Dmad","-Duseithreads"]]},"config_hash":"mPGtKvZucENWx7JfSXqERDZILXeEeo33jAad9U6AXZo","configuration":"gcc460","cpu":"x86_64","cpu_count":4,"cpu_full":"Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (GenuineIntel 1596MHz) (x86_64/4 cpu)","duration":660,"error":"","from_email":"tony@develop-help.com","host":"mars","matrix":["v5.17.4-308-g2ab171c  Configuration (common) -Dcc=/opt/gcc-4.6.0/bin/gcc","----------- ---------------------------------------------------------","m - - m - - ","m - - m - - -Duselongdouble","m - - m - - -Dmad","m - - m - - -Duseithreads","m - - m - - -Duseithreads -Duselongdouble","m - - m - - -Duseithreads -Dmad","| | | +----- PERLIO = perlio -DDEBUGGING","| | +------- PERLIO = stdio  -DDEBUGGING","| +--------- PERLIO = perlio","+----------- PERLIO = stdio"],"msg_id":"<201210191450.q9JEoVSh016237@mars.tony.develop-help.com>","nonfatal_msgs":[],"os":"linux 2.6.32-5-amd64 [debian]","osname":"linux","osversion":"2.6.32-5-amd64 [debian]","sha":"2ab171cf81a5b3a36eeb116587a7b6d28135f0f7","status":"FAIL(m)","subject":"Smoke [5.17.5] v5.17.4-308-g2ab171c FAIL(m) linux 2.6.32-5-amd64 [debian] (x86_64/4 cpu)","when_at":"2012-10-19T14:50:31"}