{"body":"","bodytext":"Automated smoke report for 5.17.10 patch a5c297aab028fd600c251fa2b6fd5f5f4d60201d v5.17.9-18-ga5c297a\nopenbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (2951 MHz) (amd64/2 cpu)\n    on        openbsd - 4.7\n    using     cc version 3.3.5 (propolice)\n    smoketime 4 days 19 hours 24 minutes (average 14 hours 25 minutes)\n\nSummary: FAIL(F)\n\nO = OK  F = Failure(s), extended report at the bottom\nX = Failure(s) under TEST but not under harness\n? = still running or test results not (yet) available\nBuild failures during:       - = unknown or N/A\nc = Configure, m = make, M = make (after miniperl), t = make test-prep\n\nv5.17.9-18-ga5c297a  Configuration (common) none\n----------- ---------------------------------------------------------\nF F O F     \nF F O O     -Duse64bitint\nF F O F     -Duseithreads\nO F O F     -Duseithreads -Duse64bitint\n| | | +----- PERLIO = perlio -DDEBUGGING\n| | +------- PERLIO = stdio  -DDEBUGGING\n| +--------- PERLIO = perlio\n+----------- PERLIO = stdio\n\n\nLocally applied patches:\n    uncommitted-changes\n    SMOKEa5c297aab028fd600c251fa2b6fd5f5f4d60201d\n\nTestsuite was run only with 'harness' and HARNESS_OPTIONS=j3\n\nFailures: (common-args) none\n[stdio] \n../t/op/alarm.t.............................................FAILED\n    4\n../lib/Benchmark.t..........................................FAILED\n    15\n    Non-zero exit status: 1\n\n[perlio] \n../cpan/Time-HiRes/t/nanosleep.t............................FAILED\n    3\n    Non-zero exit status: 1\n\n[perlio] -DDEBUGGING\n[perlio] -Duse64bitint\n[perlio] -DDEBUGGING -Duseithreads -Duse64bitint\n../lib/Benchmark.t..........................................FAILED\n    15\n    Non-zero exit status: 1\n\n[stdio] -Duse64bitint\n../t/op/alarm.t.............................................FAILED\n    4\n\n[stdio] -Duseithreads\n../t/uni/fold.t.............................................FAILED\n../cpan/Time-HiRes/t/alarm.t................................FAILED\n    2\n    Non-zero exit status: 1\n\n[perlio] -Duseithreads\n../lib/Benchmark.t..........................................FAILED\n    15\n    Non-zero exit status: 1\n../cpan/Memoize/t/expmod_t.t................................FAILED\n    7, 10\n../cpan/Time-HiRes/t/alarm.t................................FAILED\n    2\n    Non-zero exit status: 1\n../lib/version/t/02derived.t................................FAILED\n    No plan found in TAP output\n\n[perlio] -DDEBUGGING -Duseithreads\n../t/op/alarm.t.............................................FAILED\n    4\n../ext/B/t/concise-xs.t.....................................FAILED\n    No plan found in TAP output\n\n[perlio] -Duseithreads -Duse64bitint\n../cpan/Memoize/t/expmod_t.t................................FAILED\n    7, 10\n../lib/locale.t.............................................FAILED\n    No plan found in TAP output\n\nCompiler messages(gcc):\n/tmp//ccdkp2um.o(.text+0x4c): In function `main':\n/tmp//ccyj9pbO.o(.text+0x78): In function `main':\n/tmp//cckr5JsV.o(.text+0x9d): In function `xxx':\n/tmp//ccqsnmbh.o(.text+0xc4): In function `main':\ninline.h:146: warning: `S_croak_memory_wrap' defined but not used\nregcomp.o(.text+0x11faf): In function `S_regclass':\nlibperl.a(DynaLoader.o)(.text+0x32a): In function `XS_DynaLoader_dl_load_file':\nlibperl.a(regcomp.o)(.text+0x11faf): In function `S_regclass':\nutil.o(.text+0x1a9): In function `savestr':\nstr.o(.text+0x70): In function `str_2ptr':\n../libperl.a(sv.o)(.text+0x273b): In function `Perl_sv_2pv_flags':\n/tmp//cczAyAwG.o(.text+0x4c): In function `main':\n/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is often misused, please use snprintf()\n/tmp//ccqge1VC.o(.text+0x78): In function `main':\n/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is often misused, please use snprintf()\n/tmp//ccv3Vn5J.o(.text+0x9d): In function `xxx':\n/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()\n/tmp//ccclBjib.o(.text+0xc4): In function `main':\n/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()\nregcomp.o(.text+0x21d41): In function `S_regclass':\n/home/perlsmoke/smoke-me/perl-current/regcomp.c:12183: warning: sprintf() is often misused, please use snprintf()\nutil.o(.text+0x2a9): In function `savestr':\n/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()\nstr.o(.text+0x95): In function `str_2ptr':\n/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()\nlibperl.a(DynaLoader.o)(.text+0x575): In function `XS_DynaLoader_dl_load_file':\n/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: warning: strcat() is almost always misused, please use strlcat()\nlibperl.a(regcomp.o)(.text+0x21d41): In function `S_regclass':\n../libperl.a(sv.o)(.text+0x7542): In function `Perl_sv_2pv_flags':\n/home/perlsmoke/smoke-me/perl-current/sv.c:2910: warning: sprintf() is often misused, please use snprintf()\n/tmp//ccf9CyRB.o(.text+0x4c): In function `main':\n/tmp//ccCt2aln.o(.text+0x78): In function `main':\n/tmp//cckf4plG.o(.text+0x9d): In function `xxx':\n/tmp//ccYQQkkb.o(.text+0xc4): In function `main':\n/tmp//cczOngHD.o(.text+0x4c): In function `main':\n/tmp//ccmxVngh.o(.text+0x78): In function `main':\n/tmp//ccfJwFbB.o(.text+0x9d): In function `xxx':\n/tmp//ccxM8zsT.o(.text+0xc4): In function `main':\n/tmp//ccp4h5Qm.o(.text+0x4c): In function `main':\n/tmp//cc7dx3n7.o(.text+0x78): In function `main':\n/tmp//cctzyLdN.o(.text+0x9d): In function `xxx':\n/tmp//cc5ZHUPp.o(.text+0xc4): In function `main':\nregcomp.o(.text+0x13992): In function `S_regclass':\nlibperl.a(DynaLoader.o)(.text+0x374): In function `XS_DynaLoader_dl_load_file':\nlibperl.a(regcomp.o)(.text+0x13992): In function `S_regclass':\n../libperl.a(sv.o)(.text+0x2ab0): In function `Perl_sv_2pv_flags':\n/tmp//cc36v3EQ.o(.text+0x4c): In function `main':\n/tmp//ccvcmgoz.o(.text+0x78): In function `main':\n/tmp//ccmCGzKs.o(.text+0x9d): In function `xxx':\n/tmp//cctFYzmj.o(.text+0xc4): In function `main':\nregcomp.o(.text+0x244d5): In function `S_regclass':\nlibperl.a(DynaLoader.o)(.text+0x5ea): In function `XS_DynaLoader_dl_load_file':\nlibperl.a(regcomp.o)(.text+0x244d5): In function `S_regclass':\n../libperl.a(sv.o)(.text+0x796f): In function `Perl_sv_2pv_flags':\n/tmp//cc5JtmJo.o(.text+0x4c): In function `main':\n/tmp//ccXlepLE.o(.text+0x78): In function `main':\n/tmp//ccZ4me8R.o(.text+0x9d): In function `xxx':\n/tmp//cc6BdHNq.o(.text+0xc4): In function `main':\n/tmp//ccVVxwsH.o(.text+0x4c): In function `main':\n/tmp//ccrYCXy7.o(.text+0x78): In function `main':\n/tmp//ccbwMhmD.o(.text+0x9d): In function `xxx':\n/tmp//ccSfsTnr.o(.text+0xc4): In function `main':\n\n-- \nReport by Test::Smoke v1.44 build 1285 running on perl 5.10.1\n(Reporter v0.035 / Smoker v0.045)\n\nLogs at http://perl.develop-help.com/reports/\nBranch: remotes/origin/smoke-me/nicholas/merge-hv-split\nConfiguration: default\n","branch":"remotes/origin/smoke-me/nicholas/merge-hv-split","build_hash":"ScHt3TCY8t5b9MsJuucVk89cX5bHHhNuBV3UwN7r7tQ","by_build_full":"openbsd64.tony.develop-help.com\nopenbsd 4.7\n\n-Duse64bitint\n-Duseithreads\n-Duse64bitint -Duseithreads\n--\n415440\n","by_config_full":"openbsd64.tony.develop-help.com\nopenbsd 4.7\n\n-Duse64bitint\n-Duseithreads\n-Duse64bitint -Duseithreads\n","compiler":"cc 3.3.5 (propolice)","compiler_msgs":["/tmp//ccdkp2um.o(.text+0x4c): In function `main':","/tmp//ccyj9pbO.o(.text+0x78): In function `main':","/tmp//cckr5JsV.o(.text+0x9d): In function `xxx':","/tmp//ccqsnmbh.o(.text+0xc4): In function `main':","inline.h:146: warning: `S_croak_memory_wrap' defined but not used","regcomp.o(.text+0x11faf): In function `S_regclass':","libperl.a(DynaLoader.o)(.text+0x32a): In function `XS_DynaLoader_dl_load_file':","libperl.a(regcomp.o)(.text+0x11faf): In function `S_regclass':","util.o(.text+0x1a9): In function `savestr':","str.o(.text+0x70): In function `str_2ptr':","../libperl.a(sv.o)(.text+0x273b): In function `Perl_sv_2pv_flags':","/tmp//cczAyAwG.o(.text+0x4c): In function `main':","/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is often misused, please use snprintf()","/tmp//ccqge1VC.o(.text+0x78): In function `main':","/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is often misused, please use snprintf()","/tmp//ccv3Vn5J.o(.text+0x9d): In function `xxx':","/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()","/tmp//ccclBjib.o(.text+0xc4): In function `main':","/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()","regcomp.o(.text+0x21d41): In function `S_regclass':","/home/perlsmoke/smoke-me/perl-current/regcomp.c:12183: warning: sprintf() is often misused, please use snprintf()","util.o(.text+0x2a9): In function `savestr':","/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()","str.o(.text+0x95): In function `str_2ptr':","/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()","libperl.a(DynaLoader.o)(.text+0x575): In function `XS_DynaLoader_dl_load_file':","/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: warning: strcat() is almost always misused, please use strlcat()","libperl.a(regcomp.o)(.text+0x21d41): In function `S_regclass':","../libperl.a(sv.o)(.text+0x7542): In function `Perl_sv_2pv_flags':","/home/perlsmoke/smoke-me/perl-current/sv.c:2910: warning: sprintf() is often misused, please use snprintf()","/tmp//ccf9CyRB.o(.text+0x4c): In function `main':","/tmp//ccCt2aln.o(.text+0x78): In function `main':","/tmp//cckf4plG.o(.text+0x9d): In function `xxx':","/tmp//ccYQQkkb.o(.text+0xc4): In function `main':","/tmp//cczOngHD.o(.text+0x4c): In function `main':","/tmp//ccmxVngh.o(.text+0x78): In function `main':","/tmp//ccfJwFbB.o(.text+0x9d): In function `xxx':","/tmp//ccxM8zsT.o(.text+0xc4): In function `main':","/tmp//ccp4h5Qm.o(.text+0x4c): In function `main':","/tmp//cc7dx3n7.o(.text+0x78): In function `main':","/tmp//cctzyLdN.o(.text+0x9d): In function `xxx':","/tmp//cc5ZHUPp.o(.text+0xc4): In function `main':","regcomp.o(.text+0x13992): In function `S_regclass':","libperl.a(DynaLoader.o)(.text+0x374): In function `XS_DynaLoader_dl_load_file':","libperl.a(regcomp.o)(.text+0x13992): In function `S_regclass':","../libperl.a(sv.o)(.text+0x2ab0): In function `Perl_sv_2pv_flags':","/tmp//cc36v3EQ.o(.text+0x4c): In function `main':","/tmp//ccvcmgoz.o(.text+0x78): In function `main':","/tmp//ccmCGzKs.o(.text+0x9d): In function `xxx':","/tmp//cctFYzmj.o(.text+0xc4): In function `main':","regcomp.o(.text+0x244d5): In function `S_regclass':","libperl.a(DynaLoader.o)(.text+0x5ea): In function `XS_DynaLoader_dl_load_file':","libperl.a(regcomp.o)(.text+0x244d5): In function `S_regclass':","../libperl.a(sv.o)(.text+0x796f): In function `Perl_sv_2pv_flags':","/tmp//cc5JtmJo.o(.text+0x4c): In function `main':","/tmp//ccXlepLE.o(.text+0x78): In function `main':","/tmp//ccZ4me8R.o(.text+0x9d): In function `xxx':","/tmp//cc6BdHNq.o(.text+0xc4): In function `main':","/tmp//ccVVxwsH.o(.text+0x4c): In function `main':","/tmp//ccrYCXy7.o(.text+0x78): In function `main':","/tmp//ccbwMhmD.o(.text+0x9d): In function `xxx':","/tmp//ccSfsTnr.o(.text+0xc4): In function `main':"],"conf1":["","-Duse64bitint","-Duseithreads","-Duse64bitint -Duseithreads"],"conf1_struct":{"common":[],"extra":[[],["-Duse64bitint"],["-Duseithreads"],["-Duse64bitint","-Duseithreads"]]},"config_hash":"agpY4ZEVTJdVJJnYCxxlUG/o83u1ke4UjqjhxgP1v7I","configuration":"default","cpu":"amd64","cpu_count":2,"cpu_full":"Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (2951 MHz) (amd64/2 cpu)","duration":415440,"error":"","from_email":"tony@develop-help.com","host":"openbsd64.tony.develop-help.com","matrix":["v5.17.9-18-ga5c297a  Configuration (common) none","----------- ---------------------------------------------------------","F F O F     ","F F O O     -Duse64bitint","F F O F     -Duseithreads","O F O F     -Duseithreads -Duse64bitint","| | | +----- PERLIO = perlio -DDEBUGGING","| | +------- PERLIO = stdio  -DDEBUGGING","| +--------- PERLIO = perlio","+----------- PERLIO = stdio"],"msg_id":"<201302270043.r1R0hRLu016236@mars.tony.develop-help.com>","nonfatal_msgs":[],"os":"openbsd 4.7","osname":"openbsd","osversion":"4.7","sha":"a5c297aab028fd600c251fa2b6fd5f5f4d60201d","status":"FAIL(F)","subject":"Smoke [5.17.10] v5.17.9-18-ga5c297a FAIL(F) openbsd 4.7 (amd64/2 cpu)","when_at":"2013-02-27T00:34:00"}