• Reports by commit
  • Recent reports
  • Perl5 CoreSmokeDB
  • Changes
  • Smoke v5.41.6-19-g429dcba PASS linux 6.4.0-150600.23.25-default [openSUSE Leap 15.6] Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (GenuineIntel 2394MHz) 2[8 cores]

    This report never had a log

    Automated smoke report for branch blead 5.41.7 patch 429dcbaf6ff936a3b9fec8b0e7904df59f3740d6 v5.41.6-19-g429dcba.
    lx01: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (GenuineIntel 2394MHz) (x86_64/2[8 cores] cpus)
        on        linux 6.4.0-150600.23.25-default [openSUSE Leap 15.6]
        using     g++ version 7.5.0 (*1)
        smoketime 2 hours 8 minutes (average 16 minutes 4 seconds)
    
    Summary: PASS
    
    O = OK  F = Failure(s), extended report at the bottom
    X = Failure(s) under TEST but not under harness
    ? = still running or test results not (yet) available
    Build failures during:       - = unknown or N/A
    c = Configure, m = make, M = make (after miniperl), t = make test-prep
    
    v5.41.6-19-g429dcba
    ----------------------- ----------------------------------------------------
    O  O  O  O  O  O        -Dcc=g++ -Duselongdouble (*1)
    O  O  O  O  O  O        -Dcc=g++ -Duse64bitall (*1)
    O  O  O  O  O  O        -Dcc=g++ -Duseithreads -Duselongdouble (*1)
    O  O  O  O  O  O        -Dcc=g++ -Duseithreads -Duse64bitall (*1)
    |  |  |  |  |  |
    |  |  |  |  |  +------  locale:en_US.utf8 DEBUGGING
    |  |  |  |  +---------  perlio DEBUGGING
    |  |  |  +------------  stdio DEBUGGING
    |  |  +---------------  locale:en_US.utf8
    |  +------------------  perlio
    +---------------------  stdio
    
    Testsuite was run only with 'harness'
    
      Applied patches:
        SMOKE429dcbaf6ff936a3b9fec8b0e7904df59f3740d6
    Skipped tests:
        None.
    
    Test failures:
        None.
    
    Compiler messages:
        byte_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        def_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        cp_00_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        Socket.xs: In function ‘void XS_Socket_inet_aton(CV*)’:
        Socket.xs:784:35: warning: missing initializer for member ‘addrinfo::ai_family’ [-Wmissing-field-initializers]
        Socket.xs:784:35: warning: missing initializer for member ‘addrinfo::ai_socktype’ [-Wmissing-field-initializers]
        Socket.xs:784:35: warning: missing initializer for member ‘addrinfo::ai_protocol’ [-Wmissing-field-initializers]
        Socket.xs:784:35: warning: missing initializer for member ‘addrinfo::ai_addrlen’ [-Wmissing-field-initializers]
        Socket.xs:784:35: warning: missing initializer for member ‘addrinfo::ai_addr’ [-Wmissing-field-initializers]
        Socket.xs:784:35: warning: missing initializer for member ‘addrinfo::ai_canonname’ [-Wmissing-field-initializers]
        Socket.xs:784:35: warning: missing initializer for member ‘addrinfo::ai_next’ [-Wmissing-field-initializers]
        eu_01_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        gb_02_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        gb_03_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        ir_04_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        ma_05_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        ebcdic_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        ji_02_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        ji_03_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        ji_04_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        sh_06_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        jo_02_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        ks_03_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        ma_04_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        symbol_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        bi_00_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        ma_03_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        bi_01_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        cp_02_t.c:7:32: warning: option ‘-Wc++-compat’ is valid for C/ObjC but not for C++ [-Wpragmas]
        Socket.xs: In function ‘void XS_Socket_inet_aton(PerlInterpreter*, CV*)’:
    

    About this smoke:
    smoking-perl: 5.34.1
    smoker-version: 1.82/0.047
    timestamp: 2024-11-23T23:27:36Z
    tester: merijn
    
    Status overview available here: https://tux.nl/perl5/smoke/