[via nntp.perl.org] [similar] [parsed detail]
Message-ID: <201208070357.q773vNkp012523@mars.tony.develop-help.com>
Subject: Smoke [5.15.2] v5.15.2-25-gf526348 FAIL(F) openbsd 4.7 (amd64/2 cpu)
Content-type: text/plain; charset="iso-8859-1"
Date: Tue, 7 Aug 2012 13:57 +1000
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Automated smoke report for 5.15.2 patch f526348b03790a912fff80ad5e71b95decf=
ac116 v5.15.2-25-gf526348
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (29=
52 MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 1 day 5 hours 18 minutes (average 3 hours 39 minutes)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.15.2-25-gf526348 Configuration (common) none
----------- ---------------------------------------------------------
F F F O=20=20=20=20=20
F O O F -Duse64bitint
F F O F -Duseithreads
O O F O -Duseithreads -Duse64bitint
| | | +----- PERLIO =3D perlio -DDEBUGGING
| | +------- PERLIO =3D stdio -DDEBUGGING
| +--------- PERLIO =3D perlio
+----------- PERLIO =3D stdio
Locally applied patches:
uncommitted-changes
SMOKEf526348b03790a912fff80ad5e71b95decfac116
Testsuite was run only with 'harness' and HARNESS_OPTIONS=3Dj3
Failures: (common-args) none
[stdio]=20
../cpan/Memoize/t/expmod_t.t................................FAILED
11, 13
../cpan/Time-HiRes/t/gettimeofday.t.........................FAILED
5
Non-zero exit status: 1
[perlio]=20
[stdio] -DDEBUGGING
[perlio] -DDEBUGGING -Duse64bitint
[perlio] -Duseithreads
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[stdio] -Duse64bitint
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[stdio] -Duseithreads
../t/op/taint.t.............................................FAILED
Bad plan. You planned 784 tests but ran 749.
../cpan/ExtUtils-Constant/t/Constant.t......................FAILED
63
Bad plan. You planned 302 tests but ran 63.
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -DDEBUGGING -Duseithreads
../dist/Math-BigInt-FastCalc/t/mbi_rand.t...................FAILED
Bad plan. You planned 256 tests but ran 5.
[stdio] -DDEBUGGING -Duseithreads -Duse64bitint
../t/op/read.t..............................................FAILED
Bad plan. You planned 2564 tests but ran 937.
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
Passed Todo tests: (common-args) none
[stdio/perlio]=20
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duse64bitint
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../cpan/CGI/t/tmpdir.t......................................PASSED
3-9
Compiler messages(gcc):
/tmp//ccNMrZBo.o(.text+0x4c): In function `main':
/tmp//cclxHiWA.o(.text+0x78): In function `main':
/tmp//cc7CDPkR.o(.text+0x9d): In function `xxx':
/tmp//ccgO9kxQ.o(.text+0xc4): In function `main':
malloc.c: In function `getpages':
malloc.c:1694: warning: comparison between signed and unsigned
gv.c: In function `Perl_gv_fetchpvn_flags':
gv.c:1336: warning: `oldcompcv' might be used uninitialized in this function
gv.c:1341: warning: `oldcurcop' might be used uninitialized in this function
gv.c:1342: warning: `oldparser' might be used uninitialized in this function
gv.c:1343: warning: `oldsavestack_ix' might be used uninitialized in this f=
unction
sv.o(.text+0x2522): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x2d0): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(sv.o)(.text+0x2522): In function `Perl_sv_2pv_flags':
<command line>:12:1: warning: "TIME_HIRES_STAT" redefined
<command line>:11:1: warning: this is the location of the previous definiti=
on
<command line>:13:1: warning: "TIME_HIRES_STAT" redefined
<command line>:12:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x2522): In function `Perl_sv_2pv_flags':
/tmp//cc7TL4w6.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccepHZQt.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccPZePFJ.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is o=
ften misused, please use vsnprintf()
/tmp//ccDHED3f.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is of=
ten misused, please use snprintf()
sv.o(.text+0x974a): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2750: warning: sprintf() is ofte=
n misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x5aa): In function `XS_DynaLoader_dl_load_fi=
le':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: war=
ning: strcat() is almost always misused, please use strlcat()
libperl.a(sv.o)(.text+0x974a): In function `Perl_sv_2pv_flags':
<command line>:14:1: warning: "TIME_HIRES_STAT" redefined
<command line>:13:1: warning: this is the location of the previous definiti=
on
<command line>:15:1: warning: "TIME_HIRES_STAT" redefined
<command line>:14:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is =
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is o=
ften misused, please use snprintf()
../libperl.a(sv.o)(.text+0x974a): In function `Perl_sv_2pv_flags':
/tmp//cc6egQVE.o(.text+0x4c): In function `main':
/tmp//ccOWm3sm.o(.text+0x78): In function `main':
/tmp//ccz2bXmV.o(.text+0x9d): In function `xxx':
/tmp//ccbzbXUW.o(.text+0xc4): In function `main':
/tmp//ccb7hdUj.o(.text+0x4c): In function `main':
/tmp//ccWG56Ph.o(.text+0x78): In function `main':
/tmp//ccu2uGbq.o(.text+0x9d): In function `xxx':
/tmp//cc3DRdTA.o(.text+0xc4): In function `main':
/tmp//cc7CRCk5.o(.text+0x4c): In function `main':
/tmp//cc89lX3w.o(.text+0x78): In function `main':
/tmp//cc6lBtev.o(.text+0x9d): In function `xxx':
/tmp//cc3S7nhy.o(.text+0xc4): In function `main':
sv.o(.text+0x2836): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x31b): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(sv.o)(.text+0x2836): In function `Perl_sv_2pv_flags':
../libperl.a(sv.o)(.text+0x2836): In function `Perl_sv_2pv_flags':
/tmp//ccdA2WZ3.o(.text+0x4c): In function `main':
/tmp//cc9VP1Md.o(.text+0x78): In function `main':
/tmp//ccTz4au5.o(.text+0x9d): In function `xxx':
/tmp//ccZkGVD1.o(.text+0xc4): In function `main':
sv.o(.text+0x9bb3): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x601): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(sv.o)(.text+0x9bb3): In function `Perl_sv_2pv_flags':
<command line>:16:1: warning: "TIME_HIRES_STAT" redefined
<command line>:15:1: warning: this is the location of the previous definiti=
on
../libperl.a(sv.o)(.text+0x9bb3): In function `Perl_sv_2pv_flags':
/tmp//cc99XygL.o(.text+0x4c): In function `main':
/tmp//ccKSrQ4z.o(.text+0x78): In function `main':
/tmp//cciGztHf.o(.text+0x9d): In function `xxx':
/tmp//ccpKQCZG.o(.text+0xc4): In function `main':
/tmp//cct4PxOE.o(.text+0x4c): In function `main':
/tmp//ccgSlHtV.o(.text+0x78): In function `main':
/tmp//ccWpeerw.o(.text+0x9d): In function `xxx':
/tmp//ccrGpbls.o(.text+0xc4): In function `main':
--=20
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: remotes/origin/smoke-me/makedef0
Configuration: default