[via nntp.perl.org] [similar] [parsed detail]
Message-ID: <201208101426.q7AEQSPW022536@mars.tony.develop-help.com>
Subject: Smoke [5.17.3] v5.17.2-247-g1ec929f FAIL(F) openbsd 4.7 (amd64/2 cpu)
Content-type: text/plain; charset="iso-8859-1"
Date: Sat, 11 Aug 2012 00:26 +1000
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Automated smoke report for 5.17.3 patch 1ec929f158d5d615c19bfef500652deed31=
f4a6d v5.17.2-247-g1ec929f
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (29=
52 MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 8 hours 6 minutes (average 1 hour)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.17.2-247-g1ec929f Configuration (common) none
----------- ---------------------------------------------------------
F O F O=20=20=20=20=20
O F O F -Duse64bitint
F F O F -Duseithreads
F O O F -Duseithreads -Duse64bitint
| | | +----- PERLIO =3D perlio -DDEBUGGING
| | +------- PERLIO =3D stdio -DDEBUGGING
| +--------- PERLIO =3D perlio
+----------- PERLIO =3D stdio
Locally applied patches:
uncommitted-changes
SMOKE1ec929f158d5d615c19bfef500652deed31f4a6d
Testsuite was run only with 'harness' and HARNESS_OPTIONS=3Dj3
Failures: (common-args) none
[stdio]=20
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
[stdio] -DDEBUGGING
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -Duse64bitint
../t/op/alarm.t.............................................FAILED
2
[perlio] -DDEBUGGING -Duse64bitint
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
[stdio] -Duseithreads
../t/re/uniprops.t..........................................FAILED
../t/op/utf8decode.t........................................FAILED
No plan found in TAP output
[perlio] -Duseithreads
../t/porting/checkcase.t....................................FAILED
No plan found in TAP output
[perlio] -DDEBUGGING -Duseithreads
../cpan/Devel-PPPort/t/ppphtest.t...........................FAILED
../cpan/Math-Complex/t/Complex.t............................FAILED
../lib/Pod/t/utils.t........................................FAILED
No plan found in TAP output
[stdio] -Duseithreads -Duse64bitint
../t/uni/fold.t.............................................FAILED
../ext/XS-APItest/t/call.t..................................FAILED
[perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../dist/Math-BigInt/t/inf_nan.t.............................FAILED
../cpan/Digest-SHA/t/gglong.t...............................FAILED
No plan found in TAP output
Passed Todo tests: (common-args) none
[stdio/perlio]=20
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duse64bitint
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../cpan/CGI/t/tmpdir.t......................................PASSED
3-9
Compiler messages(gcc):
/tmp//cc0s0Epd.o(.text+0x4c): In function `main':
/tmp//cc0eFUTO.o(.text+0x78): In function `main':
/tmp//cc9QsfSZ.o(.text+0x9d): In function `xxx':
/tmp//ccYcuzPz.o(.text+0xc4): In function `main':
regcomp.c: In function `Perl_re_op_compile':
regcomp.c:5280: warning: variable `runtime_code' might be clobbered by `lon=
gjmp' or `vfork'
regcomp.c: In function `S_regatom':
regcomp.c:10435: warning: `oldp' might be used uninitialized in this functi=
on
regcomp.o(.text+0x13d61): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x304): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x13d61): In function `S_regclass':
<command line>:12:1: warning: "TIME_HIRES_STAT" redefined
<command line>:11:1: warning: this is the location of the previous definiti=
on
<command line>:13:1: warning: "TIME_HIRES_STAT" redefined
<command line>:12:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x2877): In function `Perl_sv_2pv_flags':
/tmp//ccxp4n4F.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccATeWMh.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//cc74xPKm.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is o=
ften misused, please use vsnprintf()
/tmp//ccsV9nsD.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is of=
ten misused, please use snprintf()
regcomp.o(.text+0x2a193): In function `S_regclass':
/home/perlsmoke/smoke-me/perl-current/regcomp.c:11537: warning: sprintf() i=
s often misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x55c): In function `XS_DynaLoader_dl_load_fi=
le':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: war=
ning: strcat() is almost always misused, please use strlcat()
libperl.a(regcomp.o)(.text+0x2a193): In function `S_regclass':
<command line>:14:1: warning: "TIME_HIRES_STAT" redefined
<command line>:13:1: warning: this is the location of the previous definiti=
on
<command line>:15:1: warning: "TIME_HIRES_STAT" redefined
<command line>:14:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is =
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is o=
ften misused, please use snprintf()
../libperl.a(sv.o)(.text+0xa79e): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2899: warning: sprintf() is ofte=
n misused, please use snprintf()
/tmp//ccLR3tqn.o(.text+0x4c): In function `main':
/tmp//cc4ELGkx.o(.text+0x78): In function `main':
/tmp//ccsRdSum.o(.text+0x9d): In function `xxx':
/tmp//ccFMHNA1.o(.text+0xc4): In function `main':
/tmp//ccuBRrVz.o(.text+0x4c): In function `main':
/tmp//ccL3U1pi.o(.text+0x78): In function `main':
/tmp//ccPrjZo6.o(.text+0x9d): In function `xxx':
/tmp//ccKb9ltW.o(.text+0xc4): In function `main':
/tmp//ccJFTvwM.o(.text+0x4c): In function `main':
/tmp//ccUNn770.o(.text+0x78): In function `main':
/tmp//ccIwcWPP.o(.text+0x9d): In function `xxx':
/tmp//ccWIvgab.o(.text+0xc4): In function `main':
regcomp.o(.text+0x154c4): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x344): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x154c4): In function `S_regclass':
../libperl.a(sv.o)(.text+0x2c0c): In function `Perl_sv_2pv_flags':
/tmp//ccfp0guJ.o(.text+0x4c): In function `main':
/tmp//cc2fq35q.o(.text+0x78): In function `main':
/tmp//ccbFFhvM.o(.text+0x9d): In function `xxx':
/tmp//ccXcb10l.o(.text+0xc4): In function `main':
regcomp.o(.text+0x2c678): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x5c9): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x2c678): In function `S_regclass':
<command line>:16:1: warning: "TIME_HIRES_STAT" redefined
<command line>:15:1: warning: this is the location of the previous definiti=
on
../libperl.a(sv.o)(.text+0xac21): In function `Perl_sv_2pv_flags':
/tmp//cc64JTNh.o(.text+0x4c): In function `main':
/tmp//ccEwQJXW.o(.text+0x78): In function `main':
/tmp//ccdXR3AN.o(.text+0x9d): In function `xxx':
/tmp//ccKzrlSH.o(.text+0xc4): In function `main':
/tmp//cc0EOHrd.o(.text+0x4c): In function `main':
/tmp//ccmqKZOG.o(.text+0x78): In function `main':
/tmp//ccHYtAdo.o(.text+0x9d): In function `xxx':
/tmp//ccadweGN.o(.text+0xc4): In function `main':
--=20
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: remotes/origin/smoke-me/warning-line-numbers
Configuration: default