[via nntp.perl.org] [similar] [parsed detail]
Message-ID: <201208281659.q7SGxBQB022828@mars.tony.develop-help.com>
Subject: Smoke [5.17.3] v5.17.2-394-g1845f04 FAIL(F) openbsd 4.7 (amd64/2 cpu)
Content-type: text/plain; charset="iso-8859-1"
Date: Wed, 29 Aug 2012 02:55 +1000
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Automated smoke report for 5.17.3 patch 1845f04276293a0f31bb3367099778bcee6=
7cda7 v5.17.2-394-g1845f04
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (30=
09 MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 8 hours 19 minutes (average 1 hour 2 minutes)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.17.2-394-g1845f04 Configuration (common) none
----------- ---------------------------------------------------------
F F O O=20=20=20=20=20
O O F O -Duse64bitint
O O F O -Duseithreads
F O O F -Duseithreads -Duse64bitint
| | | +----- PERLIO =3D perlio -DDEBUGGING
| | +------- PERLIO =3D stdio -DDEBUGGING
| +--------- PERLIO =3D perlio
+----------- PERLIO =3D stdio
Locally applied patches:
uncommitted-changes
SMOKE1845f04276293a0f31bb3367099778bcee67cda7
Testsuite was run only with 'harness' and HARNESS_OPTIONS=3Dj3
Failures: (common-args) none
[stdio]=20
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
[perlio]=20
../t/op/alarm.t.............................................FAILED
2, 4
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
[stdio] -DDEBUGGING -Duse64bitint
../t/op/alarm.t.............................................FAILED
2
[stdio] -DDEBUGGING -Duseithreads
../cpan/Time-HiRes/t/alarm.t................................FAILED
8
Non-zero exit status: 1
[stdio] -Duseithreads -Duse64bitint
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3
Non-zero exit status: 1
../dist/File-CheckTree/t/CheckTree.t........................FAILED
Bad plan. You planned 23 tests but ran 3.
Passed Todo tests: (common-args) none
[stdio/perlio]=20
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duse64bitint
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../cpan/CGI/t/tmpdir.t......................................PASSED
3-9
Compiler messages(gcc):
/tmp//ccZvIJel.o(.text+0x4c): In function `main':
/tmp//ccG1PYkc.o(.text+0x78): In function `main':
/tmp//ccrtBFVw.o(.text+0x9d): In function `xxx':
/tmp//ccKZyCuE.o(.text+0xc4): In function `main':
regcomp.c: In function `Perl_re_op_compile':
regcomp.c:5325: warning: variable `runtime_code' might be clobbered by `lon=
gjmp' or `vfork'
regcomp.c: In function `S_regatom':
regcomp.c:10442: warning: `oldp' might be used uninitialized in this functi=
on
regcomp.o(.text+0x13dfe): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x304): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x13dfe): In function `S_regclass':
<command line>:12:1: warning: "TIME_HIRES_STAT" redefined
<command line>:11:1: warning: this is the location of the previous definiti=
on
<command line>:13:1: warning: "TIME_HIRES_STAT" redefined
<command line>:12:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x2877): In function `Perl_sv_2pv_flags':
/tmp//ccUBawkJ.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccI5c9Ki.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccOq9Hbu.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is o=
ften misused, please use vsnprintf()
/tmp//ccbfN7kn.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is of=
ten misused, please use snprintf()
regcomp.o(.text+0x2a1f1): In function `S_regclass':
/home/perlsmoke/smoke-me/perl-current/regcomp.c:11553: warning: sprintf() i=
s often misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x55c): In function `XS_DynaLoader_dl_load_fi=
le':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: war=
ning: strcat() is almost always misused, please use strlcat()
libperl.a(regcomp.o)(.text+0x2a1f1): In function `S_regclass':
<command line>:14:1: warning: "TIME_HIRES_STAT" redefined
<command line>:13:1: warning: this is the location of the previous definiti=
on
<command line>:15:1: warning: "TIME_HIRES_STAT" redefined
<command line>:14:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is =
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is o=
ften misused, please use snprintf()
../libperl.a(sv.o)(.text+0xa79e): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2899: warning: sprintf() is ofte=
n misused, please use snprintf()
/tmp//ccvMKFZ4.o(.text+0x4c): In function `main':
/tmp//ccOgMGm4.o(.text+0x78): In function `main':
/tmp//ccWUwHUv.o(.text+0x9d): In function `xxx':
/tmp//cc06qt5x.o(.text+0xc4): In function `main':
/tmp//ccglPPfQ.o(.text+0x4c): In function `main':
/tmp//cc6WT41e.o(.text+0x78): In function `main':
/tmp//ccIBVQQM.o(.text+0x9d): In function `xxx':
/tmp//cccxpspu.o(.text+0xc4): In function `main':
/tmp//ccUTx367.o(.text+0x4c): In function `main':
/tmp//ccwQPBmV.o(.text+0x78): In function `main':
/tmp//cc0B7RfQ.o(.text+0x9d): In function `xxx':
/tmp//ccHHWE8v.o(.text+0xc4): In function `main':
regcomp.o(.text+0x1557f): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x344): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x1557f): In function `S_regclass':
../libperl.a(sv.o)(.text+0x2c0c): In function `Perl_sv_2pv_flags':
/tmp//ccLGxLnk.o(.text+0x4c): In function `main':
/tmp//ccESWwSN.o(.text+0x78): In function `main':
/tmp//cc4mYLUz.o(.text+0x9d): In function `xxx':
/tmp//ccUI0Hce.o(.text+0xc4): In function `main':
regcomp.o(.text+0x2c691): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x5c9): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x2c691): In function `S_regclass':
<command line>:16:1: warning: "TIME_HIRES_STAT" redefined
<command line>:15:1: warning: this is the location of the previous definiti=
on
../libperl.a(sv.o)(.text+0xac21): In function `Perl_sv_2pv_flags':
/tmp//cclY05OP.o(.text+0x4c): In function `main':
/tmp//cc72nSy8.o(.text+0x78): In function `main':
/tmp//ccYSqCz1.o(.text+0x9d): In function `xxx':
/tmp//cc2Y0WtQ.o(.text+0xc4): In function `main':
/tmp//cc6mqOWq.o(.text+0x4c): In function `main':
/tmp//ccBr5kjh.o(.text+0x78): In function `main':
/tmp//cc4vWcZw.o(.text+0x9d): In function `xxx':
/tmp//ccVTZ19m.o(.text+0xc4): In function `main':
--=20
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: remotes/origin/smoke-me/inline
Configuration: default