[via nntp.perl.org] [similar] [parsed detail]
Message-ID: <201209140534.q8E5YDEm013575@mars.tony.develop-help.com>
Subject: Smoke [5.17.3] v5.17.2-311-gcc607f3 FAIL(F) openbsd 4.7 (amd64/2 cpu)
Content-type: text/plain; charset="iso-8859-1"
Date: Fri, 14 Sep 2012 15:06 +1000
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Automated smoke report for 5.17.3 patch cc607f3f5faec13f4b36eef23ef049a0a8a=
5c09c v5.17.2-311-gcc607f3
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (29=
81 MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 7 hours 17 minutes (average 54 minutes 43 seconds)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.17.2-311-gcc607f3 Configuration (common) none
----------- ---------------------------------------------------------
F F O O=20=20=20=20=20
O O O O -Duse64bitint
F F F O -Duseithreads
F F F O -Duseithreads -Duse64bitint
| | | +----- PERLIO =3D perlio -DDEBUGGING
| | +------- PERLIO =3D stdio -DDEBUGGING
| +--------- PERLIO =3D perlio
+----------- PERLIO =3D stdio
Locally applied patches:
uncommitted-changes
SMOKEcc607f3f5faec13f4b36eef23ef049a0a8a5c09c
Testsuite was run only with 'harness' and HARNESS_OPTIONS=3Dj3
Failures: (common-args) none
[stdio]=20
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio]=20
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
[stdio] -Duseithreads
../t/op/utf8decode.t........................................FAILED
No plan found in TAP output
../cpan/IO-Compress/t/101truncate-gzip.t....................FAILED
Bad plan. You planned 3544 tests but ran 1936.
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3
Non-zero exit status: 1
../lib/Unicode/UCD.t........................................FAILED
No plan found in TAP output
[perlio] -Duseithreads
../cpan/ExtUtils-Constant/t/Constant.t......................FAILED
133
Bad plan. You planned 302 tests but ran 133.
[stdio] -DDEBUGGING -Duseithreads
../t/uni/eval.t.............................................FAILED
No plan found in TAP output
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
[stdio] -Duseithreads -Duse64bitint
../t/re/regexp_qr_embed_thr.t...............................FAILED
Bad plan. You planned 1706 tests but ran 1112.
[perlio] -Duseithreads -Duse64bitint
../t/re/pat_re_eval.t.......................................FAILED
[stdio] -DDEBUGGING -Duseithreads -Duse64bitint
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
Passed Todo tests: (common-args) none
[stdio/perlio]=20
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duse64bitint
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../cpan/CGI/t/tmpdir.t......................................PASSED
3-9
Compiler messages(gcc):
/tmp//ccgxACBE.o(.text+0x4c): In function `main':
/tmp//ccioZqnP.o(.text+0x78): In function `main':
/tmp//ccuS4wds.o(.text+0x9d): In function `xxx':
/tmp//ccgmDCbS.o(.text+0xc4): In function `main':
regcomp.c: In function `Perl_re_op_compile':
regcomp.c:5325: warning: variable `runtime_code' might be clobbered by `lon=
gjmp' or `vfork'
regcomp.c: In function `S_regatom':
regcomp.c:10442: warning: `oldp' might be used uninitialized in this functi=
on
regcomp.o(.text+0x13dfe): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x304): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x13dfe): In function `S_regclass':
<command line>:12:1: warning: "TIME_HIRES_STAT" redefined
<command line>:11:1: warning: this is the location of the previous definiti=
on
<command line>:13:1: warning: "TIME_HIRES_STAT" redefined
<command line>:12:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x2877): In function `Perl_sv_2pv_flags':
/tmp//cczEOzfk.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccdiYQDb.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccMe2Gyt.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is o=
ften misused, please use vsnprintf()
/tmp//ccH1Nk1R.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is of=
ten misused, please use snprintf()
regcomp.o(.text+0x2a1f1): In function `S_regclass':
/home/perlsmoke/smoke-me/perl-current/regcomp.c:11553: warning: sprintf() i=
s often misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x55c): In function `XS_DynaLoader_dl_load_fi=
le':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: war=
ning: strcat() is almost always misused, please use strlcat()
libperl.a(regcomp.o)(.text+0x2a1f1): In function `S_regclass':
<command line>:14:1: warning: "TIME_HIRES_STAT" redefined
<command line>:13:1: warning: this is the location of the previous definiti=
on
<command line>:15:1: warning: "TIME_HIRES_STAT" redefined
<command line>:14:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is =
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is o=
ften misused, please use snprintf()
../libperl.a(sv.o)(.text+0xa79e): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2899: warning: sprintf() is ofte=
n misused, please use snprintf()
/tmp//ccoUS18q.o(.text+0x4c): In function `main':
/tmp//ccxC3g69.o(.text+0x78): In function `main':
/tmp//ccBSxlGY.o(.text+0x9d): In function `xxx':
/tmp//ccGj6jHn.o(.text+0xc4): In function `main':
/tmp//ccFBlDDh.o(.text+0x4c): In function `main':
/tmp//ccPwKLx3.o(.text+0x78): In function `main':
/tmp//ccWxHc9F.o(.text+0x9d): In function `xxx':
/tmp//ccVUCxpF.o(.text+0xc4): In function `main':
/tmp//ccAVeHEy.o(.text+0x4c): In function `main':
/tmp//ccA2enes.o(.text+0x78): In function `main':
/tmp//ccGXQpI8.o(.text+0x9d): In function `xxx':
/tmp//ccrYMlmS.o(.text+0xc4): In function `main':
regcomp.o(.text+0x1557f): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x344): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x1557f): In function `S_regclass':
../libperl.a(sv.o)(.text+0x2c0c): In function `Perl_sv_2pv_flags':
/tmp//ccx7Ebbh.o(.text+0x4c): In function `main':
/tmp//cceOKNWi.o(.text+0x78): In function `main':
/tmp//cc3FZyEH.o(.text+0x9d): In function `xxx':
/tmp//ccLxSpst.o(.text+0xc4): In function `main':
regcomp.o(.text+0x2c691): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x5c9): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x2c691): In function `S_regclass':
<command line>:16:1: warning: "TIME_HIRES_STAT" redefined
<command line>:15:1: warning: this is the location of the previous definiti=
on
../libperl.a(sv.o)(.text+0xac21): In function `Perl_sv_2pv_flags':
/tmp//cc0iJffK.o(.text+0x4c): In function `main':
/tmp//ccrVqOXF.o(.text+0x78): In function `main':
/tmp//cccoapVE.o(.text+0x9d): In function `xxx':
/tmp//ccIbOMG2.o(.text+0xc4): In function `main':
/tmp//cc6t2dRw.o(.text+0x4c): In function `main':
/tmp//ccbShrjO.o(.text+0x78): In function `main':
/tmp//ccK5r11B.o(.text+0x9d): In function `xxx':
/tmp//cc9jmmIA.o(.text+0xc4): In function `main':
--=20
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: remotes/origin/smoke-me/dynaloader_silence_xs_warning2
Configuration: default