• Reports by commit
  • Recent reports
  • Perl5 CoreSmokeDB
  • Github
  • Changes
  • Smoke [5.14.3] v5.14.3-RC1-1-gdf5f26c FAIL(FM) openbsd 4.7 (amd64/2 cpu)

    Message-ID: <201209271412.q8RECWrE006274@mars.tony.develop-help.com>
    Subject: Smoke [5.14.3] v5.14.3-RC1-1-gdf5f26c FAIL(FM) openbsd 4.7 (amd64/2 cpu)
    Content-type: text/plain; charset="iso-8859-1"
    Date: Fri, 28 Sep 2012 00:06 +1000
    Mime-version: 1.0
    Content-transfer-encoding: quoted-printable
    
    Automated smoke report for 5.14.3 patch df5f26c1217013c4ba828fa93f8cf3256a54150b v5.14.3-RC1-1-gdf5f26c
    openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (3043 MHz) (amd64/2 cpu)
        on        openbsd - 4.7
        using     cc version 3.3.5 (propolice)
        smoketime 6 hours 47 minutes (average 50 minutes 53 seconds)
    
    Summary: FAIL(FM)
    
    O = OK  F = Failure(s), extended report at the bottom
    X = Failure(s) under TEST but not under harness
    ? = still running or test results not (yet) available
    Build failures during:       - = unknown or N/A
    c = Configure, m = make, M = make (after miniperl), t = make test-prep
    
    v5.14.3-RC1-1-gdf5f26c  Configuration (common) none
    ----------- ---------------------------------------------------------
    F F O O     
    F F F F     -Duse64bitint
    F F M -     -Duseithreads
    O F F O     -Duseithreads -Duse64bitint
    | | | +----- PERLIO = perlio -DDEBUGGING
    | | +------- PERLIO = stdio  -DDEBUGGING
    | +--------- PERLIO = perlio
    +----------- PERLIO = stdio
    
    
    Locally applied patches:
        uncommitted-changes
        SMOKEdf5f26c1217013c4ba828fa93f8cf3256a54150b
    
    Testsuite was run only with 'harness' and HARNESS_OPTIONS=j3
    
    Failures: (common-args) none
    [stdio] 
    ../t/op/getppid.t...........................................FAILED
        6-7
    ../cpan/Time-HiRes/t/HiRes.t................................FAILED
        8
    ../lib/Benchmark.t..........................................FAILED
        15
        Non-zero exit status: 1
    
    [perlio] 
    ../cpan/Time-HiRes/t/HiRes.t................................FAILED
        23
    
    [stdio] -Duse64bitint
    [perlio] -DDEBUGGING -Duse64bitint
    ../cpan/Time-HiRes/t/HiRes.t................................FAILED
        17
    
    [perlio] -Duse64bitint
    ../t/op/alarm.t.............................................FAILED
        1-2
    
    [stdio] -DDEBUGGING -Duse64bitint
    ../t/op/sigdispatch.t.......................................FAILED
        Bad plan.  You planned 17 tests but ran 0.
    ../cpan/Memoize/t/expmod_t.t................................FAILED
        7, 10
    ../cpan/Time-HiRes/t/HiRes.t................................FAILED
        8
    
    [stdio] -Duseithreads
    ../cpan/Time-HiRes/t/HiRes.t................................FAILED
        11, 23
    
    [perlio] -Duseithreads
    ../cpan/Time-HiRes/t/HiRes.t................................FAILED
        17, 23
    
    [minitest] -DDEBUGGING -Duseithreads
        t/comp/require..................FAILED--expected 51 tests, saw 47
        t/run/fresh_perl................FAILED at test 75
        t/io/perlio.....................FAILED--expected 44 tests, saw 42
        t/io/utf8.......................FAILED--expected 55 tests, saw 52
        t/re/charset....................FAILED--no leader found
        t/re/pat........................FAILED at test 390
        t/re/pat_special_cc.............FAILED--expected 9 tests, saw 0
        t/re/reg_mesg...................FAILED at test 106
        t/re/reg_posixcc................FAILED at test 1
        t/re/regexp.....................FAILED at test 118
        t/re/regexp_noamp...............FAILED at test 118
        t/re/regexp_notrie..............FAILED at test 118
        t/re/regexp_qr..................FAILED at test 118
        t/re/regexp_qr_embed............FAILED at test 118
        t/re/regexp_trielist............FAILED at test 118
        t/re/uniprops...................FAILED--no leader found
        t/op/die........................FAILED at test 14
        t/op/lc.........................FAILED--expected 93 tests, saw 25
        t/op/lc_user....................FAILED--expected 5 tests, saw 0
        t/op/mkdir......................FAILED--no leader found
        t/op/override...................FAILED at test 26
        t/op/pack.......................FAILED--no leader found
        t/op/sprintf2...................FAILED at test 1320
        t/op/turkish....................FAILED at test 1
        t/op/utfhash....................FAILED--no leader found
        t/op/utftaint...................FAILED at test 87
        t/uni/cache.....................FAILED at test 1
        t/uni/class.....................FAILED at test 1
        t/uni/fold......................FAILED at test 213
        t/uni/lower.....................FAILED--no leader found
        t/uni/overload..................FAILED at test 12
        t/uni/title.....................FAILED--no leader found
        t/uni/upper.....................FAILED--no leader found
    
    [perlio] -Duseithreads -Duse64bitint
    ../t/op/alarm.t.............................................FAILED
        2
    
    [stdio] -DDEBUGGING -Duseithreads -Duse64bitint
    ../cpan/Memoize/t/expmod_t.t................................FAILED
        7, 10
    ../cpan/Time-HiRes/t/HiRes.t................................FAILED
        17
    
    Compiler messages(gcc):
    /tmp//cc8UAja4.o(.text+0x4c): In function `main':
    /tmp//ccJzXwyF.o(.text+0x78): In function `main':
    /tmp//ccKj0TWv.o(.text+0x9d): In function `xxx':
    /tmp//ccvNDCRe.o(.text+0xc4): In function `main':
    malloc.c: In function `getpages':
    malloc.c:1694: warning: comparison between signed and unsigned
    toke.c: In function `Perl_yylex':
    toke.c:4796: warning: comparison between signed and unsigned
    sv.o(.text+0x2462): In function `Perl_sv_2pv_flags':
    libperl.a(DynaLoader.o)(.text+0x2d0): In function `XS_DynaLoader_dl_load_file':
    libperl.a(sv.o)(.text+0x2462): In function `Perl_sv_2pv_flags':
    <command line>:12:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:11:1: warning: this is the location of the previous definition
    <command line>:13:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:12:1: warning: this is the location of the previous definition
    util.o(.text+0x1a9): In function `savestr':
    str.o(.text+0x70): In function `str_2ptr':
    ../libperl.a(sv.o)(.text+0x2462): In function `Perl_sv_2pv_flags':
    /tmp//ccPTbtE9.o(.text+0x4c): In function `main':
    /home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is often misused, please use snprintf()
    /tmp//ccUg6beS.o(.text+0x78): In function `main':
    /home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is often misused, please use snprintf()
    /tmp//ccZxNguB.o(.text+0x9d): In function `xxx':
    /home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()
    /tmp//cc0cmtxA.o(.text+0xc4): In function `main':
    /home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()
    sv.o(.text+0x105e7): In function `Perl_sv_2pv_flags':
    /home/perlsmoke/smoke-me/perl-current/sv.c:2762: warning: sprintf() is often misused, please use snprintf()
    libperl.a(DynaLoader.o)(.text+0x69d): In function `XS_DynaLoader_dl_load_file':
    /home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: warning: strcat() is almost always misused, please use strlcat()
    libperl.a(sv.o)(.text+0x105e7): In function `Perl_sv_2pv_flags':
    <command line>:14:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:13:1: warning: this is the location of the previous definition
    <command line>:15:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:14:1: warning: this is the location of the previous definition
    util.o(.text+0x2a9): In function `savestr':
    /home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()
    str.o(.text+0x95): In function `str_2ptr':
    /home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()
    ../libperl.a(sv.o)(.text+0x105e7): In function `Perl_sv_2pv_flags':
    /tmp//ccRdie3u.o(.text+0x4c): In function `main':
    /tmp//ccrFBYDo.o(.text+0x78): In function `main':
    /tmp//ccHnQkJe.o(.text+0x9d): In function `xxx':
    /tmp//ccLaWN36.o(.text+0xc4): In function `main':
    /tmp//ccdGbXOh.o(.text+0x4c): In function `main':
    /tmp//ccvBiOxj.o(.text+0x78): In function `main':
    /tmp//ccJXNGQq.o(.text+0x9d): In function `xxx':
    /tmp//ccZcyBYc.o(.text+0xc4): In function `main':
    /tmp//cccxPmJ2.o(.text+0x4c): In function `main':
    /tmp//ccw9eh1w.o(.text+0x78): In function `main':
    /tmp//ccIpubGT.o(.text+0x9d): In function `xxx':
    /tmp//cc06rM47.o(.text+0xc4): In function `main':
    sv.o(.text+0x27a6): In function `Perl_sv_2pv_flags':
    libperl.a(DynaLoader.o)(.text+0x31b): In function `XS_DynaLoader_dl_load_file':
    libperl.a(sv.o)(.text+0x27a6): In function `Perl_sv_2pv_flags':
    ../libperl.a(sv.o)(.text+0x27a6): In function `Perl_sv_2pv_flags':
    /tmp//ccvPsPtl.o(.text+0x4c): In function `main':
    /tmp//ccypxbFb.o(.text+0x78): In function `main':
    /tmp//cc9HvSN5.o(.text+0x9d): In function `xxx':
    /tmp//ccHZByvq.o(.text+0xc4): In function `main':
    sv.o(.text+0x109e1): In function `Perl_sv_2pv_flags':
    /tmp//ccps1GY1.o(.text+0x4c): In function `main':
    /tmp//ccVUHMdN.o(.text+0x78): In function `main':
    /tmp//ccXoplZ4.o(.text+0x9d): In function `xxx':
    /tmp//cczSXYdZ.o(.text+0xc4): In function `main':
    /tmp//ccZi95Hw.o(.text+0x4c): In function `main':
    /tmp//cc7JA5AQ.o(.text+0x78): In function `main':
    /tmp//ccGqe61J.o(.text+0x9d): In function `xxx':
    /tmp//cczUl7Vo.o(.text+0xc4): In function `main':
    libperl.a(DynaLoader.o)(.text+0x6fa): In function `XS_DynaLoader_dl_load_file':
    libperl.a(sv.o)(.text+0x109e1): In function `Perl_sv_2pv_flags':
    <command line>:16:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:15:1: warning: this is the location of the previous definition
    ../libperl.a(sv.o)(.text+0x109e1): In function `Perl_sv_2pv_flags':
    
    -- 
    Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
    (Reporter v0.035 / Smoker v0.045)
    
    Logs at http://perl.develop-help.com/reports/
    Branch: origin/maint-5.14
    Configuration: default