[via nntp.perl.org] [similar] [parsed detail]
Message-ID: <201212270920.qBR9KWbV015873@mars.tony.develop-help.com>
Subject: Smoke [5.17.8] v5.17.7.0-112-g9fc1b44 FAIL(F) openbsd 4.7 (amd64/2 cpu)
Content-type: text/plain; charset="iso-8859-1"
Date: Thu, 27 Dec 2012 19:59 +1100
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Automated smoke report for 5.17.8 patch 9fc1b446946500eed6f668b6c529a4688d6=
866c2 v5.17.7.0-112-g9fc1b44
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (30=
09 MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 11 hours 13 minutes (average 1 hour 24 minutes)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.17.7.0-112-g9fc1b44 Configuration (common) none
----------- ---------------------------------------------------------
F F F F=20=20=20=20=20
F F F F -Duse64bitint
F F F F -Duseithreads
F O F F -Duseithreads -Duse64bitint
| | | +----- PERLIO =3D perlio -DDEBUGGING
| | +------- PERLIO =3D stdio -DDEBUGGING
| +--------- PERLIO =3D perlio
+----------- PERLIO =3D stdio
Locally applied patches:
uncommitted-changes
SMOKE9fc1b446946500eed6f668b6c529a4688d6866c2
Testsuite was run only with 'harness' and HARNESS_OPTIONS=3Dj3
Failures: (common-args) none
[stdio]=20
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio]=20
[stdio] -DDEBUGGING
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
[perlio] -DDEBUGGING
../t/op/sigdispatch.t.......................................FAILED
Bad plan. You planned 29 tests but ran 22.
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
[stdio] -Duse64bitint
[stdio] -DDEBUGGING -Duseithreads
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -Duse64bitint
../cpan/Time-HiRes/t/alarm.t................................FAILED
2, 8-9
Non-zero exit status: 3
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
[stdio] -DDEBUGGING -Duse64bitint
[perlio] -DDEBUGGING -Duseithreads
../t/op/alarm.t.............................................FAILED
4
[perlio] -DDEBUGGING -Duse64bitint
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3
Non-zero exit status: 1
[stdio] -Duseithreads
../t/comp/utf.t.............................................FAILED
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
[perlio] -Duseithreads
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
[stdio] -Duseithreads -Duse64bitint
../dist/Math-BigInt/t/mbi_rand.t............................FAILED
Bad plan. You planned 512 tests but ran 48.
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[stdio] -DDEBUGGING -Duseithreads -Duse64bitint
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../t/uni/fold.t.............................................FAILED
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3
Non-zero exit status: 1
Compiler messages(gcc):
/tmp//ccqkbaWn.o(.text+0x4c): In function `main':
/tmp//cc4N1qTi.o(.text+0x78): In function `main':
/tmp//ccp4O684.o(.text+0x9d): In function `xxx':
/tmp//ccPE0Vwt.o(.text+0xc4): In function `main':
inline.h:135: warning: `S_croak_memory_wrap' defined but not used
regcomp.o(.text+0x11f22): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x32a): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x11f22): In function `S_regclass':
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x27ec): In function `Perl_sv_2pv_flags':
/tmp//ccdyBOVq.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//cc7Qgnt3.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccU0n4t4.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is o=
ften misused, please use vsnprintf()
/tmp//cc2UZaaG.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is of=
ten misused, please use snprintf()
regcomp.o(.text+0x217d3): In function `S_regclass':
/home/perlsmoke/smoke-me/perl-current/regcomp.c:11421: warning: sprintf() i=
s often misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x575): In function `XS_DynaLoader_dl_load_fi=
le':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: war=
ning: strcat() is almost always misused, please use strlcat()
libperl.a(regcomp.o)(.text+0x217d3): In function `S_regclass':
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is =
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is o=
ften misused, please use snprintf()
../libperl.a(sv.o)(.text+0x78ea): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2910: warning: sprintf() is ofte=
n misused, please use snprintf()
/tmp//ccOxd9HX.o(.text+0x4c): In function `main':
/tmp//ccXDt7PN.o(.text+0x78): In function `main':
/tmp//cczAUsQ9.o(.text+0x9d): In function `xxx':
/tmp//cccAE8w0.o(.text+0xc4): In function `main':
/tmp//cczBiRSw.o(.text+0x4c): In function `main':
/tmp//ccU8eEVO.o(.text+0x78): In function `main':
/tmp//ccvOH24e.o(.text+0x9d): In function `xxx':
/tmp//cc6D4PjW.o(.text+0xc4): In function `main':
/tmp//ccH60gA6.o(.text+0x4c): In function `main':
/tmp//ccRixdA7.o(.text+0x78): In function `main':
/tmp//ccHCFlrR.o(.text+0x9d): In function `xxx':
/tmp//ccWfIop2.o(.text+0xc4): In function `main':
regcomp.o(.text+0x13a5b): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x374): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x13a5b): In function `S_regclass':
../libperl.a(sv.o)(.text+0x2b60): In function `Perl_sv_2pv_flags':
/tmp//ccg7vZiP.o(.text+0x4c): In function `main':
/tmp//ccIO13kX.o(.text+0x78): In function `main':
/tmp//ccrHMl1e.o(.text+0x9d): In function `xxx':
/tmp//ccYsa69B.o(.text+0xc4): In function `main':
regcomp.o(.text+0x23ecc): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x5ea): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x23ecc): In function `S_regclass':
../libperl.a(sv.o)(.text+0x7d2f): In function `Perl_sv_2pv_flags':
/tmp//cctJVNfX.o(.text+0x4c): In function `main':
/tmp//ccl6Oq5t.o(.text+0x78): In function `main':
/tmp//ccY4fsbH.o(.text+0x9d): In function `xxx':
/tmp//ccQwwjOT.o(.text+0xc4): In function `main':
/tmp//ccuhhaYL.o(.text+0x4c): In function `main':
/tmp//ccZxkLoC.o(.text+0x78): In function `main':
/tmp//ccBtHaeR.o(.text+0x9d): In function `xxx':
/tmp//ccNog2OD.o(.text+0xc4): In function `main':
--=20
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: origin/blead
Configuration: default