[via nntp.perl.org] [similar] [parsed detail]
Message-ID: <201212311449.qBVEnYEU032076@mars.tony.develop-help.com>
Subject: Smoke [5.17.8] v5.17.7.0-136-g1feab43 FAIL(F) openbsd 4.7 (amd64/2 cpu)
Content-type: text/plain; charset="iso-8859-1"
Date: Tue, 1 Jan 2013 01:15 +1100
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Automated smoke report for 5.17.8 patch 1feab43956f936b2526693e4394a9653fce=
a6079 v5.17.7.0-136-g1feab43
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (30=
09 MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 11 hours 51 minutes (average 1 hour 28 minutes)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.17.7.0-136-g1feab43 Configuration (common) none
----------- ---------------------------------------------------------
F F F F=20=20=20=20=20
F F O F -Duse64bitint
F F F F -Duseithreads
F F F F -Duseithreads -Duse64bitint
| | | +----- PERLIO =3D perlio -DDEBUGGING
| | +------- PERLIO =3D stdio -DDEBUGGING
| +--------- PERLIO =3D perlio
+----------- PERLIO =3D stdio
Locally applied patches:
uncommitted-changes
SMOKE1feab43956f936b2526693e4394a9653fcea6079
Testsuite was run only with 'harness' and HARNESS_OPTIONS=3Dj3
Failures: (common-args) none
[stdio]=20
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
[perlio]=20
../t/op/sigdispatch.t.......................................FAILED
Bad plan. You planned 29 tests but ran 27.
[stdio] -DDEBUGGING
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -DDEBUGGING
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
[stdio] -Duse64bitint
../t/op/fork.t..............................................FAILED
25
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
[perlio] -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
../t/op/sigdispatch.t.......................................FAILED
Bad plan. You planned 29 tests but ran 23.
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -DDEBUGGING -Duse64bitint
[perlio] -DDEBUGGING -Duseithreads
[perlio] -Duseithreads -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
[stdio] -Duseithreads
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3
Non-zero exit status: 1
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -Duseithreads
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
[stdio] -DDEBUGGING -Duseithreads
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Test-Harness/t/multiplexer.t........................FAILED
No plan found in TAP output
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
[stdio] -Duseithreads -Duse64bitint
../cpan/Devel-PPPort/t/ppphtest.t...........................FAILED
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[stdio] -DDEBUGGING -Duseithreads -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../dist/Math-BigInt/t/biglog.t..............................FAILED
Bad plan. You planned 70 tests but ran 9.
[perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Time-HiRes/t/alarm.t................................FAILED
8-9
Non-zero exit status: 2
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3
Non-zero exit status: 1
Compiler messages(gcc):
/tmp//ccAz4Agy.o(.text+0x4c): In function `main':
/tmp//cc4Eaer1.o(.text+0x78): In function `main':
/tmp//ccaQyokP.o(.text+0x9d): In function `xxx':
/tmp//ccHeOTfj.o(.text+0xc4): In function `main':
inline.h:135: warning: `S_croak_memory_wrap' defined but not used
regcomp.c:8041: warning: `S_invlist_iterfinish' declared inline after being=
called
regcomp.o(.text+0x11f85): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x32a): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x11f85): In function `S_regclass':
re_comp.c:8041: warning: `S_invlist_iterfinish' declared inline after being=
called
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x27ec): In function `Perl_sv_2pv_flags':
/tmp//ccooSU55.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccYHr7k9.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//cc6243Ew.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is o=
ften misused, please use vsnprintf()
/tmp//ccYPlY87.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is of=
ten misused, please use snprintf()
regcomp.o(.text+0x22279): In function `S_regclass':
/home/perlsmoke/smoke-me/perl-current/regcomp.c:11481: warning: sprintf() i=
s often misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x575): In function `XS_DynaLoader_dl_load_fi=
le':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: war=
ning: strcat() is almost always misused, please use strlcat()
libperl.a(regcomp.o)(.text+0x22279): In function `S_regclass':
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is =
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is o=
ften misused, please use snprintf()
../libperl.a(sv.o)(.text+0x78ea): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2910: warning: sprintf() is ofte=
n misused, please use snprintf()
/tmp//cc0aRLcK.o(.text+0x4c): In function `main':
/tmp//ccoXVR8M.o(.text+0x78): In function `main':
/tmp//ccbOKkpB.o(.text+0x9d): In function `xxx':
/tmp//ccCtLjeQ.o(.text+0xc4): In function `main':
/tmp//ccB6LAb9.o(.text+0x4c): In function `main':
/tmp//ccO4hkus.o(.text+0x78): In function `main':
/tmp//cckQ8UaF.o(.text+0x9d): In function `xxx':
/tmp//ccRX5pfz.o(.text+0xc4): In function `main':
/tmp//ccOzCGom.o(.text+0x4c): In function `main':
/tmp//ccgunn2V.o(.text+0x78): In function `main':
/tmp//ccojKjlF.o(.text+0x9d): In function `xxx':
/tmp//ccGKXuUY.o(.text+0xc4): In function `main':
regcomp.o(.text+0x13b46): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x374): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x13b46): In function `S_regclass':
../libperl.a(sv.o)(.text+0x2b60): In function `Perl_sv_2pv_flags':
/tmp//ccXFswlq.o(.text+0x4c): In function `main':
/tmp//ccGiI3WP.o(.text+0x78): In function `main':
/tmp//cc3ufQvI.o(.text+0x9d): In function `xxx':
/tmp//ccPZLXGi.o(.text+0xc4): In function `main':
regcomp.o(.text+0x249c2): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x5ea): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x249c2): In function `S_regclass':
../libperl.a(sv.o)(.text+0x7d2f): In function `Perl_sv_2pv_flags':
/tmp//cclLc0OP.o(.text+0x4c): In function `main':
/tmp//cc8GNQZt.o(.text+0x78): In function `main':
/tmp//cchni0LV.o(.text+0x9d): In function `xxx':
/tmp//ccACpbKt.o(.text+0xc4): In function `main':
/tmp//ccJpMMsU.o(.text+0x4c): In function `main':
/tmp//ccsONewb.o(.text+0x78): In function `main':
/tmp//ccsAffha.o(.text+0x9d): In function `xxx':
/tmp//ccAg3zin.o(.text+0xc4): In function `main':
--=20
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: origin/blead
Configuration: default