[via nntp.perl.org] [similar] [parsed detail]
Message-ID: <201302092321.r19NLhgi016145@mars.tony.develop-help.com>
Subject: Smoke [5.17.9] v5.17.8-114-gea8afdb FAIL(F) openbsd 4.7 (amd64/2 cpu)
Content-type: text/plain; charset="iso-8859-1"
Date: Sun, 10 Feb 2013 10:19 +1100
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Automated smoke report for 5.17.9 patch ea8afdb5b52b73b87b9134b8ac12f6432f1=
df0b6 v5.17.8-114-gea8afdb
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (29=
56 MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 12 hours 7 minutes (average 1 hour 30 minutes)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.17.8-114-gea8afdb Configuration (common) none
----------- ---------------------------------------------------------
F F F F=20=20=20=20=20
F F F F -Duse64bitint
F F F F -Duseithreads
F O F F -Duseithreads -Duse64bitint
| | | +----- PERLIO =3D perlio -DDEBUGGING
| | +------- PERLIO =3D stdio -DDEBUGGING
| +--------- PERLIO =3D perlio
+----------- PERLIO =3D stdio
Locally applied patches:
uncommitted-changes
SMOKEea8afdb5b52b73b87b9134b8ac12f6432f1df0b6
Testsuite was run only with 'harness' and HARNESS_OPTIONS=3Dj3
Failures: (common-args) none
[stdio]=20
[stdio] -Duse64bitint
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio]=20
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3
Non-zero exit status: 1
[stdio] -DDEBUGGING
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
[perlio] -DDEBUGGING
[perlio] -DDEBUGGING -Duse64bitint
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
[stdio] -DDEBUGGING -Duse64bitint
../cpan/Memoize/t/expmod_t.t................................FAILED
7
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3
Non-zero exit status: 1
[stdio] -Duseithreads
../cpan/CPAN-Meta-YAML/t/02_basic.t.........................FAILED
Bad plan. You planned 1140 tests but ran 634.
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
[perlio] -Duseithreads
../t/op/alarm.t.............................................FAILED
4
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Module-Pluggable/t/04acmedir_single.t...............FAILED
No plan found in TAP output
../dist/I18N-LangTags/t/80_all_env.t........................FAILED
Bad plan. You planned 17 tests but ran 15.
[stdio] -DDEBUGGING -Duseithreads
../cpan/Unicode-Collate/t/contract.t........................FAILED
Bad plan. You planned 74 tests but ran 5.
[perlio] -DDEBUGGING -Duseithreads
../t/op/utf8decode.t........................................FAILED
No plan found in TAP output
[stdio] -Duseithreads -Duse64bitint
../t/op/read.t..............................................FAILED
../ext/XS-APItest/t/grok.t..................................FAILED
No plan found in TAP output
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[stdio] -DDEBUGGING -Duseithreads -Duse64bitint
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Time-HiRes/t/alarm.t................................FAILED
6
Non-zero exit status: 1
[perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
Compiler messages(gcc):
/tmp//ccY1lvLe.o(.text+0x4c): In function `main':
/tmp//ccFJFMDT.o(.text+0x78): In function `main':
/tmp//cc4sZBIR.o(.text+0x9d): In function `xxx':
/tmp//ccHyOQQH.o(.text+0xc4): In function `main':
inline.h:135: warning: `S_croak_memory_wrap' defined but not used
regcomp.o(.text+0x11e83): In function `S_regclass':
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
libperl.a(DynaLoader.o)(.text+0x32a): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x11e83): In function `S_regclass':
../libperl.a(sv.o)(.text+0x27ec): In function `Perl_sv_2pv_flags':
/tmp//ccWvUiVI.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccSIZPSt.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//cc7nEYVw.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is o=
ften misused, please use vsnprintf()
/tmp//ccQdo1rd.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is of=
ten misused, please use snprintf()
regcomp.o(.text+0x214b2): In function `S_regclass':
/home/perlsmoke/smoke-me/perl-current/regcomp.c:12249: warning: sprintf() i=
s often misused, please use snprintf()
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is =
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is o=
ften misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x575): In function `XS_DynaLoader_dl_load_fi=
le':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: war=
ning: strcat() is almost always misused, please use strlcat()
libperl.a(regcomp.o)(.text+0x214b2): In function `S_regclass':
../libperl.a(sv.o)(.text+0x78ea): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2910: warning: sprintf() is ofte=
n misused, please use snprintf()
/tmp//ccIQtIp7.o(.text+0x4c): In function `main':
/tmp//cc4jtwgU.o(.text+0x78): In function `main':
/tmp//ccBNZNge.o(.text+0x9d): In function `xxx':
/tmp//cc60ZSK3.o(.text+0xc4): In function `main':
/tmp//ccqJquz0.o(.text+0x4c): In function `main':
/tmp//cclQUYLs.o(.text+0x78): In function `main':
/tmp//ccIq1cLW.o(.text+0x9d): In function `xxx':
/tmp//ccFO3QL7.o(.text+0xc4): In function `main':
/tmp//ccOlhmkq.o(.text+0x4c): In function `main':
/tmp//ccRBuSE6.o(.text+0x78): In function `main':
/tmp//cccI4qmA.o(.text+0x9d): In function `xxx':
/tmp//ccGLTzlC.o(.text+0xc4): In function `main':
regcomp.o(.text+0x13784): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x374): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x13784): In function `S_regclass':
../libperl.a(sv.o)(.text+0x2b60): In function `Perl_sv_2pv_flags':
/tmp//ccprlHU1.o(.text+0x4c): In function `main':
/tmp//cc1UNi7H.o(.text+0x78): In function `main':
/tmp//cc3maEb6.o(.text+0x9d): In function `xxx':
/tmp//ccI5trPU.o(.text+0xc4): In function `main':
regcomp.o(.text+0x23d15): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x5ea): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x23d15): In function `S_regclass':
../libperl.a(sv.o)(.text+0x7d2f): In function `Perl_sv_2pv_flags':
/tmp//ccdJtwBj.o(.text+0x4c): In function `main':
/tmp//cc1Pdbqz.o(.text+0x78): In function `main':
/tmp//cc8RleYd.o(.text+0x9d): In function `xxx':
/tmp//ccde73b0.o(.text+0xc4): In function `main':
/tmp//cch5sZbe.o(.text+0x4c): In function `main':
/tmp//ccvSsVnr.o(.text+0x78): In function `main':
/tmp//ccVDTg09.o(.text+0x9d): In function `xxx':
/tmp//ccDYMYFl.o(.text+0xc4): In function `main':
--=20
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: remotes/origin/smoke-me/remove-regcomp-setjmp
Configuration: default