[via nntp.perl.org] [similar] [parsed detail]
Message-ID: <201303122322.r2CNM3Oj005633@mars.tony.develop-help.com>
Subject: Smoke [5.17.10] v5.17.9-146-g4b9734b FAIL(F) openbsd 4.7 (amd64/2 cpu)
Content-type: text/plain; charset="iso-8859-1"
Date: Wed, 13 Mar 2013 09:26 +1100
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Automated smoke report for 5.17.10 patch 4b9734bf16232aac75ed56df6352c09d1c=
aad7b3 v5.17.9-146-g4b9734b
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (43=
83 MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 10 hours 55 minutes (average 1 hour 21 minutes)
Summary: FAIL(F)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.17.9-146-g4b9734b Configuration (common) none
----------- ---------------------------------------------------------
F F F F=20=20=20=20=20
F F F F -Duse64bitint
F F F F -Duseithreads
F F F F -Duseithreads -Duse64bitint
| | | +----- PERLIO =3D perlio -DDEBUGGING
| | +------- PERLIO =3D stdio -DDEBUGGING
| +--------- PERLIO =3D perlio
+----------- PERLIO =3D stdio
Locally applied patches:
uncommitted-changes
SMOKE4b9734bf16232aac75ed56df6352c09d1caad7b3
Testsuite was run only with 'harness' and HARNESS_OPTIONS=3Dj3
Failures: (common-args) none
[stdio]=20
../t/op/alarm.t.............................................FAILED
4
../cpan/Memoize/t/expmod_t.t................................FAILED
7
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
[perlio]=20
../t/op/alarm.t.............................................FAILED
2
../cpan/Memoize/t/expmod_t.t................................FAILED
7
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
[stdio] -DDEBUGGING
[stdio] -Duse64bitint
[perlio] -Duseithreads -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
../cpan/Memoize/t/expmod_t.t................................FAILED
7
[perlio] -DDEBUGGING
[perlio] -DDEBUGGING -Duse64bitint
[perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../t/op/alarm.t.............................................FAILED
2
../cpan/Memoize/t/expmod_t.t................................FAILED
7
[perlio] -Duse64bitint
../cpan/Memoize/t/expmod_t.t................................FAILED
7
[stdio] -DDEBUGGING -Duse64bitint
../t/op/alarm.t.............................................FAILED
2
../cpan/Memoize/t/expmod_t.t................................FAILED
7
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
[stdio] -Duseithreads
../t/op/alarm.t.............................................FAILED
2
../cpan/Memoize/t/expmod_t.t................................FAILED
7
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
[perlio] -Duseithreads
../t/op/alarm.t.............................................FAILED
4
../t/op/lock.t..............................................FAILED
No plan found in TAP output
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
../cpan/Memoize/t/expmod_t.t................................FAILED
7
[stdio] -DDEBUGGING -Duseithreads
../t/op/alarm.t.............................................FAILED
4
../cpan/Memoize/t/expmod_t.t................................FAILED
7
../cpan/Time-HiRes/t/alarm.t................................FAILED
8-9
Non-zero exit status: 2
[perlio] -DDEBUGGING -Duseithreads
../t/op/alarm.t.............................................FAILED
2
../cpan/Memoize/t/expmod_t.t................................FAILED
7
../cpan/Archive-Extract/t/01_Archive-Extract.t..............FAILED
No plan found in TAP output
[stdio] -Duseithreads -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
../cpan/Memoize/t/expmod_t.t................................FAILED
7
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
[stdio] -DDEBUGGING -Duseithreads -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
../cpan/Memoize/t/expmod_t.t................................FAILED
7
../cpan/Time-HiRes/t/alarm.t................................FAILED
6
Non-zero exit status: 1
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
Compiler messages(gcc):
/tmp//cc6dfUAz.o(.text+0x4c): In function `main':
/tmp//ccNwtQKM.o(.text+0x78): In function `main':
/tmp//ccx2Ix7k.o(.text+0x9d): In function `xxx':
/tmp//ccgvwhEm.o(.text+0xc4): In function `main':
inline.h:146: warning: `S_croak_memory_wrap' defined but not used
regcomp.o(.text+0x11f83): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x32a): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x11f83): In function `S_regclass':
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x2752): In function `Perl_sv_2pv_flags':
/tmp//cc5EnPXf.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccXhJBLr.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccgBgCNr.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is o=
ften misused, please use vsnprintf()
/tmp//ccjBhid9.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is of=
ten misused, please use snprintf()
regcomp.o(.text+0x21d11): In function `S_regclass':
/home/perlsmoke/smoke-me/perl-current/regcomp.c:12185: warning: sprintf() i=
s often misused, please use snprintf()
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is =
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is o=
ften misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x575): In function `XS_DynaLoader_dl_load_fi=
le':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: war=
ning: strcat() is almost always misused, please use strlcat()
libperl.a(regcomp.o)(.text+0x21d11): In function `S_regclass':
../libperl.a(sv.o)(.text+0x7502): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2910: warning: sprintf() is ofte=
n misused, please use snprintf()
/tmp//ccXfZLeH.o(.text+0x4c): In function `main':
/tmp//cc56Xo8J.o(.text+0x78): In function `main':
/tmp//ccSOy5qY.o(.text+0x9d): In function `xxx':
/tmp//cce7gB94.o(.text+0xc4): In function `main':
/tmp//cc2Q4uL4.o(.text+0x4c): In function `main':
/tmp//ccLTkvoz.o(.text+0x78): In function `main':
/tmp//ccqsUPXb.o(.text+0x9d): In function `xxx':
/tmp//ccF7axAc.o(.text+0xc4): In function `main':
/tmp//ccCmPLAF.o(.text+0x4c): In function `main':
/tmp//ccuvGnVy.o(.text+0x78): In function `main':
/tmp//ccpCkJp9.o(.text+0x9d): In function `xxx':
/tmp//ccbf5w2G.o(.text+0xc4): In function `main':
regcomp.o(.text+0x13932): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x374): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x13932): In function `S_regclass':
../libperl.a(sv.o)(.text+0x2abe): In function `Perl_sv_2pv_flags':
/tmp//ccc44Omn.o(.text+0x4c): In function `main':
/tmp//cczSPk0e.o(.text+0x78): In function `main':
/tmp//ccXZuvZa.o(.text+0x9d): In function `xxx':
/tmp//ccAJ14yF.o(.text+0xc4): In function `main':
regcomp.o(.text+0x244a8): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x5ea): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(regcomp.o)(.text+0x244a8): In function `S_regclass':
../libperl.a(sv.o)(.text+0x792f): In function `Perl_sv_2pv_flags':
/tmp//cc7QV6ZW.o(.text+0x4c): In function `main':
/tmp//ccRCuTJe.o(.text+0x78): In function `main':
/tmp//cc6lOdDU.o(.text+0x9d): In function `xxx':
/tmp//ccCK5ZQx.o(.text+0xc4): In function `main':
/tmp//ccmeT9sl.o(.text+0x4c): In function `main':
/tmp//ccGgapKU.o(.text+0x78): In function `main':
/tmp//cc6XFAXL.o(.text+0x9d): In function `xxx':
/tmp//ccobmMAO.o(.text+0xc4): In function `main':
--=20
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: origin/blead
Configuration: default