• Reports by commit
  • Recent reports
  • Perl5 CoreSmokeDB
  • Github
  • Changes
  • Smoke [5.17.3] v5.17.2-402-g2c6f48d FAIL(m) linux 3.2.0-4-amd64 [debian] (x86_64/4 cpu)

    Message-ID: <201310070400.r9740whi021185@mars.tony.develop-help.com>
    Content-Transfer-Encoding: 8bit
    Content-Type: text/plain; charset="UTF8"
    MIME-Version: 1.0
    Date: Mon, 7 Oct 2013 15:00:58 +1100
    Subject: Smoke [5.17.3] v5.17.2-402-g2c6f48d FAIL(m) linux 3.2.0-4-amd64 [debian] (x86_64/4 cpu)
    
    Automated smoke report for 5.17.3 patch 2c6f48dedc3f910006ab88a925f379df66a4e2aa v5.17.2-402-g2c6f48d
    mars: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (GenuineIntel 1596MHz) (x86_64/4 cpu)
        on        linux - 3.2.0-4-amd64 [debian]
        using     g++ version 4.7.2
        smoketime 11 minutes (average 55 seconds)
    
    Summary: FAIL(m)
    
    O = OK  F = Failure(s), extended report at the bottom
    X = Failure(s) under TEST but not under harness
    ? = still running or test results not (yet) available
    Build failures during:       - = unknown or N/A
    c = Configure, m = make, M = make (after miniperl), t = make test-prep
    
    v5.17.2-402-g2c6f48d  Configuration (common) -Dcc=g++
    ----------- ---------------------------------------------------------
    m - - m - - 
    m - - m - - -Duselongdouble
    m - - m - - -Dmad
    m - - m - - -Duseithreads
    m - - m - - -Duseithreads -Duselongdouble
    m - - m - - -Duseithreads -Dmad
    | | | +----- PERLIO = perlio -DDEBUGGING
    | | +------- PERLIO = stdio  -DDEBUGGING
    | +--------- PERLIO = perlio
    +----------- PERLIO = stdio
    
    
    Locally applied patches:
        uncommitted-changes
        SMOKE2c6f48dedc3f910006ab88a925f379df66a4e2aa
    
    Testsuite was run only with 'harness' and HARNESS_OPTIONS=j4
    
    Compiler messages(gcc):
    regcomp.c: In function ‘regnode* S_regatom(RExC_state_t*, I32*, U32)’:
    regcomp.c:10956:23: warning: ‘p’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    pp_ctl.c: In function ‘OP* Perl_pp_goto()’:
    pp_ctl.c:2856:8: warning: variable ‘newsp’ set but not used [-Wunused-but-set-variable]
    pp_ctl.c:2857:7: warning: variable ‘gimme’ set but not used [-Wunused-but-set-variable]
    regexec.c: In function ‘I32 S_regmatch(regmatch_info*, regnode*)’:
    regexec.c:4001:1: warning: variable ‘throw_away’ set but not used [-Wunused-but-set-variable]
    perlio.c:5009:1: error: invalid conversion from ‘int’ to ‘utf8_flags’ [-fpermissive]
    perlio.c: In function ‘STRLEN validate(const U8*, const U8*, int, PerlIOl**)’:
    perlio.c:4990:1: warning: control reaches end of non-void function [-Wreturn-type]
    regcomp.c: In function ‘void S_dump_trie(const _reg_trie_data*, HV*, AV*, U32)’:
    regcomp.c:1058:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
    regcomp.c: In function ‘void S_dump_trie_interim_list(const _reg_trie_data*, HV*, AV*, U32, U32)’:
    regcomp.c:1149:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
    regcomp.c: In function ‘void S_dump_trie_interim_table(const _reg_trie_data*, HV*, AV*, U32, U32)’:
    regcomp.c:1207:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
    regcomp.c: In function ‘REGEXP* Perl_re_op_compile(SV**, int, OP*, const regexp_engine*, REGEXP*, bool*, U32, U32)’:
    regcomp.c:6448:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
    regcomp.c: In function ‘SV* Perl_reg_named_buff_nextkey(REGEXP*, U32)’:
    regcomp.c:6596:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
    regcomp.c: In function ‘void Perl_pregfree2(REGEXP*)’:
    regcomp.c:13891:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
    toke.c: In function ‘int Perl_yylex()’:
    toke.c:8160:19: warning: variable ‘have_proto’ set but not used [-Wunused-but-set-variable]
    regcomp.c: In function ‘regnode* S_regatom(PerlInterpreter*, RExC_state_t*, I32*, U32)’:
    pp_ctl.c: In function ‘OP* Perl_pp_goto(PerlInterpreter*)’:
    regexec.c: In function ‘I32 S_regmatch(PerlInterpreter*, regmatch_info*, regnode*)’:
    perlio.c: In function ‘STRLEN validate(PerlInterpreter*, const U8*, const U8*, int, PerlIOl**)’:
    regcomp.c: In function ‘void S_dump_trie(PerlInterpreter*, const _reg_trie_data*, HV*, AV*, U32)’:
    regcomp.c: In function ‘void S_dump_trie_interim_list(PerlInterpreter*, const _reg_trie_data*, HV*, AV*, U32, U32)’:
    regcomp.c: In function ‘void S_dump_trie_interim_table(PerlInterpreter*, const _reg_trie_data*, HV*, AV*, U32, U32)’:
    regcomp.c: In function ‘REGEXP* Perl_re_op_compile(PerlInterpreter*, SV**, int, OP*, const regexp_engine*, REGEXP*, bool*, U32, U32)’:
    regcomp.c: In function ‘SV* Perl_reg_named_buff_nextkey(PerlInterpreter*, REGEXP*, U32)’:
    regcomp.c: In function ‘void Perl_pregfree2(PerlInterpreter*, REGEXP*)’:
    toke.c: In function ‘int Perl_yylex(PerlInterpreter*)’:
    
    -- 
    Report by Test::Smoke v1.43 build 1271 running on perl 5.14.2
    (Reporter v0.035 / Smoker v0.045)
    
    Logs at http://perl.develop-help.com/reports/
    Branch: remotes/origin/smoke-me/leont/safe-utf8
    Configuration: cpp