• Reports by commit
  • Recent reports
  • Perl5 CoreSmokeDB
  • Github
  • Changes
  • Smoke [5.8.9] maint-5.8-10-g5d97567 FAIL(XF) linux 3.16.0-4-amd64 [debian] (x86_64/12 cpu)

    Message-ID: <201505061042.t46AgKqa012628@compaq.bandsman.co.uk>
    Content-transfer-encoding: 8bit
    Content-type: text/plain; charset=UTF8
    MIME-version: 1.0
    Date: Wed, 06 May 2015 06:42:20 -0400
    Subject: Smoke [5.8.9] maint-5.8-10-g5d97567 FAIL(XF) linux 3.16.0-4-amd64 [debian] (x86_64/12 cpu)
    
    Automated smoke report for 5.8.9 patch 5d97567dd5d99fd909fe6858c74f7b2ca0ad9772 maint-5.8-10-g5d97567
    cyberpower2: Intel(R) Core(TM) i7-4960X CPU @ 3.60GHz (GenuineIntel 3225MHz) (x86_64/12 cpu)
        on        linux - 3.16.0-4-amd64 [debian]
        using     cc version 4.9.2
        smoketime 3 hours 18 minutes (average 11 minutes 1 seconds)
    
    Summary: FAIL(XF)
    
    O = OK  F = Failure(s), extended report at the bottom
    X = Failure(s) under TEST but not under harness
    ? = still running or test results not (yet) available
    Build failures during:       - = unknown or N/A
    c = Configure, m = make, M = make (after miniperl), t = make test-prep
    
    maint-5.8-10-g5d97567  Configuration (common) none
    ----------- ---------------------------------------------------------
    F - F -     -Uuseperlio
    F F F F     
    F F F F     -Duse64bitint
    X X X X     -Duselongdouble
    X X X X     -Dusemorebits
    F F F F     -Duseithreads
    F F F F     -Duseithreads -Duse64bitint
    X X X X     -Duseithreads -Duselongdouble
    X X X X     -Duseithreads -Dusemorebits
    | | | +----- PERLIO = perlio -DDEBUGGING
    | | +------- PERLIO = stdio  -DDEBUGGING
    | +--------- PERLIO = perlio
    +----------- PERLIO = stdio
    
    
    Locally applied patches:
        MAINT35104
        SMOKE5d97567dd5d99fd909fe6858c74f7b2ca0ad9772
    
    Failures: (common-args) none
    [stdio] -Uuseperlio
    [stdio] -DDEBUGGING -Uuseperlio
    [stdio/perlio] 
    [stdio/perlio] -DDEBUGGING
    [stdio/perlio] -Duse64bitint
    [stdio/perlio] -DDEBUGGING -Duse64bitint
    [stdio/perlio] -Duseithreads
    [stdio/perlio] -DDEBUGGING -Duseithreads
    [stdio/perlio] -Duseithreads -Duse64bitint
    [stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitint
        ../t/comp/cpp.t.........................FAILED ??
        ../t/op/numconvert.t....................FAILED 112 136 140 144 152 156 160
                                                       168 172 176
        ../t/run/switchPx.t.....................FAILED ??
    
    [stdio/perlio] -Duselongdouble
    [stdio] -DDEBUGGING -Duselongdouble
    [stdio/perlio] -Dusemorebits
    [stdio/perlio] -DDEBUGGING -Dusemorebits
    [perlio] -Duseithreads -Duselongdouble
    [stdio/perlio] -DDEBUGGING -Duseithreads -Duselongdouble
    [stdio] -Duseithreads -Dusemorebits
    [stdio/perlio] -DDEBUGGING -Duseithreads -Dusemorebits
    Inconsistent test results (between TEST and harness):
        ../t/run/switchPx.t.....................FAILED--no leader found
        ../t/comp/cpp.t.........................FAILED--no leader found
    
    [perlio] -DDEBUGGING -Duselongdouble
    [stdio] -Duseithreads -Duselongdouble
    [perlio] -Duseithreads -Dusemorebits
    Inconsistent test results (between TEST and harness):
        ../t/comp/cpp.t.........................FAILED--no leader found
        ../t/run/switchPx.t.....................FAILED--no leader found
    
    Compiler messages(gcc):
    try.c: In function ‘main’:
    util.c: In function ‘Perl_safesyscalloc’:
    util.c:268:14: warning: variable ‘total_size’ set but not used [-Wunused-but-set-variable]
    hv.c: In function ‘Perl_hv_common’:
    hv.c:35:48: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
    hv.c: In function ‘S_share_hek_flags’:
    pp_hot.c: In function ‘Perl_pp_sassign’:
    sv.h:272:45: warning: value computed is not used [-Wunused-value]
    sv.c: In function ‘Perl_sv_2pv_flags’:
    pp.c: In function ‘Perl_pp_not’:
    pp.c:2484:25: warning: identifier "not" is a special operator name in C++ [-Wc++-compat]
    pp.c: In function ‘Perl_pp_complement’:
    pp.c:2491:31: warning: identifier "compl" is a special operator name in C++ [-Wc++-compat]
    pp.c: In function ‘Perl_pp_ucfirst’:
    pp.c: In function ‘Perl_pp_uc’:
    pp.c: In function ‘Perl_pp_lc’:
    pp_ctl.c: In function ‘Perl_pp_xor’:
    sv.h:1402:15: warning: operation on ‘PL_Xpv’ may be undefined [-Wsequence-point]
    pp_ctl.c: In function ‘Perl_pp_leavetry’:
    pp_ctl.c:3700:9: warning: variable ‘optype’ set but not used [-Wunused-but-set-variable]
    pp_ctl.c: In function ‘S_run_user_filter’:
    pp_sys.c: In function ‘Perl_pp_getpriority’:
    pp_sys.c:4276:23: warning: enum conversion when passing argument 1 of ‘getpriority’ is invalid in C++ [-Wc++-compat]
    pp_sys.c: In function ‘Perl_pp_setpriority’:
    pp_sys.c:4291:23: warning: enum conversion when passing argument 1 of ‘setpriority’ is invalid in C++ [-Wc++-compat]
    regexec.c: In function ‘S_find_byclass’:
    regexec.c:117:39: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
    regexec.c: In function ‘S_regmatch’:
    regexec.c: In function ‘S_regrepeat’:
    regcomp.c: In function ‘Perl_pregcomp’:
    regcomp.c:135:30: warning: ‘RExC_state.end’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    regcomp.c:132:34: warning: ‘RExC_state.precomp’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    regcomp.c:139:31: warning: ‘RExC_state.emit’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    regcomp.c:133:30: warning: ‘RExC_state.rx’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    perlio.c: In function ‘PerlIO_apply_layers’:
    perlio.c:247:35: warning: unused parameter ‘f’ [-Wunused-parameter]
    perlio.c:247:50: warning: unused parameter ‘mode’ [-Wunused-parameter]
    perlio.c: In function ‘PerlIO_binmode’:
    perlio.c:269:68: warning: unused parameter ‘names’ [-Wunused-parameter]
    perlio.c: In function ‘PerlIO_fdupopen’:
    perlio.c:282:48: warning: unused parameter ‘param’ [-Wunused-parameter]
    perlio.c:282:59: warning: unused parameter ‘flags’ [-Wunused-parameter]
    perlio.c: In function ‘PerlIO_openn’:
    perlio.c:323:32: warning: unused parameter ‘layers’ [-Wunused-parameter]
    pp_pack.c: In function ‘S_pack_rec’:
    pp_pack.c:2716:7: warning: variable ‘was_utf8’ set but not used [-Wunused-but-set-variable]
    POSIX.o: In function `XS_POSIX_tmpnam':
    /home/njh/perl5/perl-build-smoker/perl-5.8.x/ext/POSIX/POSIX.xs:1518: warning: the use of `tmpnam' is dangerous, better use `mkstemp'
    perlio.c: In function ‘PerlIOBuf_get_base’:
    perlio.c:4111:9: warning: operation on ‘b->buf’ may be undefined [-Wsequence-point]
    sv.h:1402:15: warning: operation on ‘my_perl->TXpv’ may be undefined [-Wsequence-point]
    perlapi.h:67:22: warning: ISO C forbids conversion of function pointer to object pointer type [-Wpedantic]
    
    -- 
    Report by Test::Smoke v1.53 build 1374 running on perl 5.20.2
    (Reporter v0.050 / Smoker v0.045)