[via nntp.perl.org] [similar] [parsed detail]
Date: Tue, 1 Dec 2015 00:01 -0500
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Content-type: text/plain; charset="UTF8"
Subject: Smoke [smoke-me/jhi/hexfp] v5.23.5-82-gc956abf PASS linux 3.16.0-43-generic [debian] (x86_64/8 cpu) {smoke-me_g++_quick}
Message-ID: <20151201050527.5DCB74E0A88@zwei>
Smoke logs available at http://m-l.org/~perl/smoke/perl/linux/smoke-me_g++_=
quick/Jarkko%20Hietaniemi/logc956abf96a9302d7ca71292b0b925f5e77701130.log.gz
Automated smoke report for 5.23.6 patch c956abf96a9302d7ca71292b0b925f5e777=
01130 v5.23.5-82-gc956abf
zwei: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (GenuineIntel 2667MHz) (x86_64=
/8 cpu)
on linux - 3.16.0-43-generic [debian]
using g++ version 4.9.1
smoketime 40 minutes 47 seconds (average 10 minutes 12 seconds)
Summary: PASS
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.23.5-82-gc956abf Configuration (common) -Accflags=3D-DPERL_POISON -Dcc=
=3Dg++
----------- ---------------------------------------------------------
O O=20=20=20=20=20=20=20=20=20
O O -Duseithreads
| +--------- -DDEBUGGING
+----------- no debugging
Locally applied patches:
SMOKEc956abf96a9302d7ca71292b0b925f5e77701130
Testsuite was run only with 'harness'
Compiler messages(gcc):
mg.c: In function =E2=80=98int Perl_magic_set(SV*, MAGIC*)=E2=80=99:
mg.c:2657:17: warning: variable =E2=80=98s=E2=80=99 set but not used [-Wunu=
sed-but-set-variable]
inflate.c:1487:9: warning: unused parameter =E2=80=98subvert=E2=80=99 [-Wun=
used-parameter]
ListUtil.xs: In function =E2=80=98void XS_List__Util_reduce(CV*)=E2=80=99:
../../cop.h:1203:10: warning: variable =E2=80=98newsp=E2=80=99 set but not=
used [-Wunused-but-set-variable]
ListUtil.xs: In function =E2=80=98void XS_List__Util_first(CV*)=E2=80=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_any(CV*)=E2=80=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_pairfirst(CV*)=E2=80=
=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_pairgrep(CV*)=E2=80=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_pairmap(CV*)=E2=80=99:
ListUtil.xs:807:17: warning: unused variable =E2=80=98a=E2=80=99 [-Wunused-=
variable]
ListUtil.xs:808:17: warning: unused variable =E2=80=98b=E2=80=99 [-Wunused-=
variable]
ListUtil.xs:849:17: warning: unused variable =E2=80=98a=E2=80=99 [-Wunused-=
variable]
ListUtil.xs:850:17: warning: unused variable =E2=80=98b=E2=80=99 [-Wunused-=
variable]
POSIX.o: In function `XS_POSIX_tmpnam(cv*)':
Typemap.c: In function =E2=80=98void XS_XS__Typemap_T_ARRAY(CV*)=E2=80=99:
Typemap.c:1667:70: warning: comparison is always false due to limited range=
of data type [-Wtype-limits]
Normalize.c: In function =E2=80=98void XS_Unicode__Normalize_isComp2nd(CV*)=
=E2=80=99:
../../XSUB.h:202:20: warning: unused variable =E2=80=98ix=E2=80=99 [-Wunus=
ed-variable]
POSIX.o: In function `XS_POSIX_tmpnam':
/home/perl/smoke/perl/smoke-me_g++_quick/build/ext/POSIX/POSIX.xs:3364: war=
ning: the use of `tmpnam' is dangerous, better use `mkstemp'
mg.c: In function =E2=80=98int Perl_magic_set(PerlInterpreter*, SV*, MAGIC*=
)=E2=80=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_reduce(PerlInterpreter=
*, CV*)=E2=80=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_first(PerlInterpreter*=
, CV*)=E2=80=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_any(PerlInterpreter*, =
CV*)=E2=80=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_pairfirst(PerlInterpre=
ter*, CV*)=E2=80=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_pairgrep(PerlInterpret=
er*, CV*)=E2=80=99:
ListUtil.xs: In function =E2=80=98void XS_List__Util_pairmap(PerlInterprete=
r*, CV*)=E2=80=99:
Typemap.c: In function =E2=80=98void XS_XS__Typemap_T_ARRAY(PerlInterpreter=
*, CV*)=E2=80=99:
POSIX.o: In function `XS_POSIX_tmpnam(interpreter*, cv*)':
threads.xs: In function =E2=80=98void* S_ithread_run(void*)=E2=80=99:
../../perl.h:165:22: warning: variable =E2=80=98my_perl=E2=80=99 might be =
clobbered by =E2=80=98longjmp=E2=80=99 or =E2=80=98vfork=E2=80=99 [-Wclobbe=
red]
Normalize.c: In function =E2=80=98void XS_Unicode__Normalize_isComp2nd(Perl=
Interpreter*, CV*)=E2=80=99:
--=20
Report by Test::Smoke v1.53 build 1374 running on perl 5.20.1
(Reporter v0.050 / Smoker v0.045)