• Reports by commit
  • Recent reports
  • Perl5 CoreSmokeDB
  • Github
  • Changes
  • Smoke [5.11.0] blead-2375-g9d169eb PASS-so-far openbsd 4.5 (i386/1 cpu)

    Message-ID: <4ab97090.0508d00a.1239.ffffc45e@mx.google.com>
    Date: Tue, 22 Sep 2009 17:49:20 -0700 (PDT)
    Subject: Smoke [5.11.0] blead-2375-g9d169eb PASS-so-far openbsd 4.5 (i386/1 cpu)
    
    Automated smoke report for 5.11.0 patch 9d169eb4da35d0142fb35b8fb32a7564b799bb6a blead-2375-g9d169eb
    p5openbsd: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) (909 MHz) (i386/1 cpu)
        on        openbsd - 4.5
        using     cc version 3.3.5 (propolice)
        smoketime 2 hours 33 minutes (average 19 minutes 12 seconds)
    
    Summary: PASS-so-far
    
    O = OK  F = Failure(s), extended report at the bottom
    X = Failure(s) under TEST but not under harness
    ? = still running or test results not (yet) available
    Build failures during:       - = unknown or N/A
    c = Configure, m = make, M = make (after miniperl), t = make test-prep
    
    blead-2375-g9d169eb  Configuration (common) none
    ----------- ---------------------------------------------------------
    - - - -     
    - - - -     -Duse64bitint
    - - - -     -Duseithreads
    - - ? -     -Duseithreads -Duse64bitint
    | | | +----- PERLIO = perlio -DDEBUGGING
    | | +------- PERLIO = stdio  -DDEBUGGING
    | +--------- PERLIO = perlio
    +----------- PERLIO = stdio
    
    
    Locally applied patches:
        SMOKE9d169eb4da35d0142fb35b8fb32a7564b799bb6a
    
    MANIFEST did not declare 'ext/autouse/t/lib/MyTestModule.pm'
    
    Compiler messages(gcc):
    Configure .../tmp//ccznLdZJ.o(.text+0x3e): In function `main':
    /tmp//ccDPkiMK.o(.text+0x5d): In function `main':
    /tmp//cceOlWqd.o(.text+0x1c): In function `xxx':
    /tmp//cccQIbeF.o(.text+0xde): In function `main':
    sv.o(.text+0x1d8b): In function `Perl_sv_2pv_flags':
    libperl.a(DynaLoader.o)(.text+0x242): In function `XS_DynaLoader_dl_load_file':
    libperl.a(sv.o)(.text+0x1d8b): In function `Perl_sv_2pv_flags':
    <command line>:12:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:11:1: warning: this is the location of the previous definition
    <command line>:13:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:12:1: warning: this is the location of the previous definition
    util.o(.text+0x1b3): In function `savestr':
    str.o(.text+0x5d): In function `str_2ptr':
    Configure .../tmp//ccqTEcuc.o(.text+0x3e): In function `main':
    /home/sts/source/p5-current/UU/try.c:20: warning: sprintf() is often misused, please use snprintf()
    /tmp//ccorFIba.o(.text+0x5d): In function `main':
    /home/sts/source/p5-current/UU/try.c:29: warning: sprintf() is often misused, please use snprintf()
    /tmp//ccYjASjL.o(.text+0x1c): In function `xxx':
    /home/sts/source/p5-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()
    /tmp//ccLXGCgJ.o(.text+0xde): In function `main':
    /home/sts/source/p5-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()
    sv.o(.text+0xb7ff): In function `Perl_sv_2pv_flags':
    /home/sts/source/p5-current/sv.c:2774: warning: sprintf() is often misused, please use snprintf()
    libperl.a(DynaLoader.o)(.text+0x556): In function `XS_DynaLoader_dl_load_file':
    /home/sts/source/p5-current/ext/DynaLoader/DynaLoader.xs:171: warning: strcat() is almost always misused, please use strlcat()
    libperl.a(sv.o)(.text+0xb7ff): In function `Perl_sv_2pv_flags':
    <command line>:14:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:13:1: warning: this is the location of the previous definition
    <command line>:15:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:14:1: warning: this is the location of the previous definition
    util.o(.text+0x283): In function `savestr':
    /home/sts/source/p5-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()
    str.o(.text+0x81): In function `str_2ptr':
    /home/sts/source/p5-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()
    Configure .../tmp//ccJIvmeE.o(.text+0x3e): In function `main':
    /tmp//ccgtsskA.o(.text+0x5d): In function `main':
    /tmp//ccWJnolV.o(.text+0x1c): In function `xxx':
    /tmp//ccSQumMC.o(.text+0xde): In function `main':
    sv.o(.text+0x224f): In function `Perl_sv_2pv_flags':
    libperl.a(sv.o)(.text+0x224f): In function `Perl_sv_2pv_flags':
    Configure .../tmp//ccWihaeY.o(.text+0x3e): In function `main':
    /tmp//ccixfxYG.o(.text+0x5d): In function `main':
    /tmp//ccVrzlXl.o(.text+0x1c): In function `xxx':
    /tmp//ccoayNvF.o(.text+0xde): In function `main':
    sv.o(.text+0xac26): In function `Perl_sv_2pv_flags':
    libperl.a(DynaLoader.o)(.text+0x55a): In function `XS_DynaLoader_dl_load_file':
    libperl.a(sv.o)(.text+0xac26): In function `Perl_sv_2pv_flags':
    Configure .../tmp//ccheMlBo.o(.text+0x3e): In function `main':
    /tmp//ccFXAgyw.o(.text+0x5d): In function `main':
    /tmp//ccLzodRZ.o(.text+0x1c): In function `xxx':
    /tmp//ccBKnoLy.o(.text+0xde): In function `main':
    sv.o(.text+0x1ee7): In function `Perl_sv_2pv_flags':
    libperl.a(DynaLoader.o)(.text+0x4aa): In function `XS_DynaLoader_dl_load_file':
    libperl.a(sv.o)(.text+0x1ee7): In function `Perl_sv_2pv_flags':
    Configure .../tmp//ccQBDUGi.o(.text+0x3e): In function `main':
    /tmp//ccmbAdQO.o(.text+0x5d): In function `main':
    /tmp//ccIVhJyL.o(.text+0x1c): In function `xxx':
    /tmp//ccbtcPcY.o(.text+0xde): In function `main':
    sv.o(.text+0xba3b): In function `Perl_sv_2pv_flags':
    libperl.a(DynaLoader.o)(.text+0x8de): In function `XS_DynaLoader_dl_load_file':
    libperl.a(sv.o)(.text+0xba3b): In function `Perl_sv_2pv_flags':
    <command line>:16:1: warning: "TIME_HIRES_STAT" redefined
    <command line>:15:1: warning: this is the location of the previous definition
    Configure .../tmp//cconmcyX.o(.text+0x3e): In function `main':
    /tmp//ccRrJGtS.o(.text+0x5d): In function `main':
    /tmp//ccmbCrEH.o(.text+0x1c): In function `xxx':
    /tmp//ccDachcJ.o(.text+0xde): In function `main':
    sv.o(.text+0x239b): In function `Perl_sv_2pv_flags':
    libperl.a(sv.o)(.text+0x239b): In function `Perl_sv_2pv_flags':
    Configure .../tmp//ccQpVyph.o(.text+0x3e): In function `main':
    /tmp//ccFAhYQI.o(.text+0x5d): In function `main':
    /tmp//ccTMPaHu.o(.text+0x1c): In function `xxx':
    /tmp//ccurbJTj.o(.text+0xde): In function `main':
    sv.o(.text+0xaebe): In function `Perl_sv_2pv_flags':
    libperl.a(sv.o)(.text+0xaebe): In function `Perl_sv_2pv_flags':
    
    -- 
    Report by Test::Smoke v1.40 build 1242 running on perl 5.10.0
    (Reporter v0.035 / Smoker v0.044)