[via nntp.perl.org] [similar] [parsed detail]
Message-ID: <201105180414.p4I4EjiI030470@mars.tony.develop-help.com>
Subject: Smoke [5.14.0] v5.14.0-3-g0655a6c FAIL(FM) openbsd 4.7 (amd64/2 cpu)
Content-type: text/plain; charset="iso-8859-1"
Date: Wed, 18 May 2011 13:57 +1000
Mime-version: 1.0
Content-transfer-encoding: quoted-printable
Automated smoke report for 5.14.0 patch 0655a6ceecc59980a782a10617825beba5e=
c6fec v5.14.0-3-g0655a6c
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (29=
52 MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 4 hours 25 minutes (average 33 minutes 9 seconds)
Summary: FAIL(FM)
O =3D OK F =3D Failure(s), extended report at the bottom
X =3D Failure(s) under TEST but not under harness
? =3D still running or test results not (yet) available
Build failures during: - =3D unknown or N/A
c =3D Configure, m =3D make, M =3D make (after miniperl), t =3D make test-p=
rep
v5.14.0-3-g0655a6c Configuration (common) none
----------- ---------------------------------------------------------
M - O O=20=20=20=20=20
F O F O -Duse64bitint
F F O O -Duseithreads
O O O O -Duseithreads -Duse64bitint
| | | +----- PERLIO =3D perlio -DDEBUGGING
| | +------- PERLIO =3D stdio -DDEBUGGING
| +--------- PERLIO =3D perlio
+----------- PERLIO =3D stdio
Locally applied patches:
uncommitted-changes
SMOKE0655a6ceecc59980a782a10617825beba5ec6fec
Testsuite was run only with 'harness' and HARNESS_OPTIONS=3Dj3
Failures: (common-args) none
[minitest]=20
t/comp/require..................FAILED--expected 51 tests, saw 47
t/run/fresh_perl................FAILED at test 75
t/io/utf8.......................FAILED at test 53
t/re/charset....................FAILED at test 685
t/re/pat........................FAILED at test 390
t/re/reg_mesg...................FAILED at test 106
t/re/reg_posixcc................FAILED at test 1
t/re/regexp.....................FAILED at test 118
t/re/regexp_noamp...............FAILED at test 118
t/re/regexp_notrie..............FAILED at test 118
t/re/regexp_qr..................FAILED at test 118
t/re/regexp_qr_embed............FAILED at test 118
t/re/regexp_trielist............FAILED at test 118
t/re/uniprops...................FAILED--no leader found
t/op/blocks.....................FAILED--no leader found
t/op/die........................FAILED at test 14
t/op/gv.........................FAILED--no leader found
t/op/hash.......................FAILED--no leader found
t/op/lc.........................FAILED--expected 93 tests, saw 25
t/op/lc_user....................FAILED--expected 5 tests, saw 0
t/op/method.....................FAILED--no leader found
t/op/mkdir......................FAILED--no leader found
t/op/my_stash...................FAILED--no leader found
t/op/override...................FAILED at test 26
t/op/pack.......................FAILED--no leader found
t/op/push.......................FAILED--no leader found
t/op/smartkve...................FAILED--no leader found
t/op/split......................FAILED--no leader found
t/op/tie........................FAILED at test 2
t/op/tiehandle..................FAILED--no leader found
t/op/turkish....................FAILED at test 1
t/op/universal..................FAILED--no leader found
t/op/utfhash....................FAILED--expected 99 tests, saw 91
t/op/utftaint...................FAILED--no leader found
t/uni/cache.....................FAILED at test 1
t/uni/class.....................FAILED at test 1
t/uni/fold......................FAILED at test 213
t/uni/lower.....................FAILED--no leader found
t/uni/overload..................FAILED at test 12
t/uni/title.....................FAILED--no leader found
t/uni/upper.....................FAILED--no leader found
[stdio] -Duse64bitint
[stdio] -DDEBUGGING -Duse64bitint
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[stdio] -Duseithreads
../cpan/Test-Harness/t/regression.t.........................FAILED
No plan found in TAP output
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -Duseithreads
../cpan/CPAN-Meta-YAML/t/02_basic.t.........................FAILED
Compiler messages(gcc):
/tmp//ccSX0TVZ.o(.text+0x4c): In function `main':
/tmp//ccHFIDn4.o(.text+0x78): In function `main':
/tmp//ccG7dsJT.o(.text+0x9d): In function `xxx':
/tmp//cc1L6dY7.o(.text+0xc4): In function `main':
malloc.c: In function `getpages':
malloc.c:1694: warning: comparison between signed and unsigned
toke.c: In function `Perl_yylex':
toke.c:4796: warning: comparison between signed and unsigned
sv.o(.text+0x2462): In function `Perl_sv_2pv_flags':
/tmp//ccrVXiCM.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//ccQPtWIc.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is of=
ten misused, please use snprintf()
/tmp//cce3G1Xa.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is o=
ften misused, please use vsnprintf()
/tmp//ccF9QXSc.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is of=
ten misused, please use snprintf()
sv.o(.text+0x105e7): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2762: warning: sprintf() is ofte=
n misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x69d): In function `XS_DynaLoader_dl_load_fi=
le':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: war=
ning: strcat() is almost always misused, please use strlcat()
libperl.a(sv.o)(.text+0x105e7): In function `Perl_sv_2pv_flags':
<command line>:14:1: warning: "TIME_HIRES_STAT" redefined
<command line>:13:1: warning: this is the location of the previous definiti=
on
<command line>:15:1: warning: "TIME_HIRES_STAT" redefined
<command line>:14:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is =
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is o=
ften misused, please use snprintf()
../libperl.a(sv.o)(.text+0x105e7): In function `Perl_sv_2pv_flags':
/tmp//ccLK6FSt.o(.text+0x4c): In function `main':
/tmp//ccdCT0ZN.o(.text+0x78): In function `main':
/tmp//cc7nJNRt.o(.text+0x9d): In function `xxx':
/tmp//ccIR3XA5.o(.text+0xc4): In function `main':
libperl.a(DynaLoader.o)(.text+0x2d0): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(sv.o)(.text+0x2462): In function `Perl_sv_2pv_flags':
<command line>:12:1: warning: "TIME_HIRES_STAT" redefined
<command line>:11:1: warning: this is the location of the previous definiti=
on
<command line>:13:1: warning: "TIME_HIRES_STAT" redefined
<command line>:12:1: warning: this is the location of the previous definiti=
on
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x2462): In function `Perl_sv_2pv_flags':
/tmp//ccrXxkUc.o(.text+0x4c): In function `main':
/tmp//ccTn0Vyy.o(.text+0x78): In function `main':
/tmp//cc5GaRjn.o(.text+0x9d): In function `xxx':
/tmp//ccQaF0Yq.o(.text+0xc4): In function `main':
/tmp//ccF3oPOL.o(.text+0x4c): In function `main':
/tmp//ccdo8ZrV.o(.text+0x78): In function `main':
/tmp//ccKp898e.o(.text+0x9d): In function `xxx':
/tmp//cclmKBlA.o(.text+0xc4): In function `main':
sv.o(.text+0x27a6): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x31b): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(sv.o)(.text+0x27a6): In function `Perl_sv_2pv_flags':
../libperl.a(sv.o)(.text+0x27a6): In function `Perl_sv_2pv_flags':
/tmp//ccCdOjhN.o(.text+0x4c): In function `main':
/tmp//cc6zAOXn.o(.text+0x78): In function `main':
/tmp//ccqugeQK.o(.text+0x9d): In function `xxx':
/tmp//ccghnO6s.o(.text+0xc4): In function `main':
sv.o(.text+0x109e1): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x6fa): In function `XS_DynaLoader_dl_load_fi=
le':
libperl.a(sv.o)(.text+0x109e1): In function `Perl_sv_2pv_flags':
<command line>:16:1: warning: "TIME_HIRES_STAT" redefined
<command line>:15:1: warning: this is the location of the previous definiti=
on
../libperl.a(sv.o)(.text+0x109e1): In function `Perl_sv_2pv_flags':
/tmp//ccAPsSsY.o(.text+0x4c): In function `main':
/tmp//cclfTmOH.o(.text+0x78): In function `main':
/tmp//ccOEzz52.o(.text+0x9d): In function `xxx':
/tmp//ccvNSq4T.o(.text+0xc4): In function `main':
/tmp//ccPjtmzB.o(.text+0x4c): In function `main':
/tmp//ccUczKKE.o(.text+0x78): In function `main':
/tmp//ccEBh98H.o(.text+0x9d): In function `xxx':
/tmp//ccff4UFA.o(.text+0xc4): In function `main':
--=20
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: remotes/origin/smoke-me/cpan
Configuration: default