• Reports by commit
  • Recent reports
  • Perl5 CoreSmokeDB
  • Github
  • Changes
    •

    Smoke [5.15.0] v5.15.0 PASS linux 2.6.39-2-amd64 [debian] (x86_64/2 cpu)

    [via nntp.perl.org] [similar] [parsed detail] 

    Message-ID: <201106210203.p5L231EY001518@bandsman.dyndns-ip.com>
MIME-version: 1.0
Content-transfer-encoding: 8bit
Content-type: text/plain; charset=UTF8
Date: Mon, 20 Jun 2011 22:03:01 -0400
Subject: Smoke [5.15.0] v5.15.0 PASS linux 2.6.39-2-amd64 [debian] (x86_64/2 cpu)

Automated smoke report for 5.15.0 patch 00b4043708e2509400eff8f5e4cb870d388854d4 v5.15.0
bandsman.dyndns-ip.com: AMD Athlon(tm) Dual Core Processor 4450e (AuthenticAMD 2300MHz) (x86_64/2 cpu)
    on        linux - 2.6.39-2-amd64 [debian]
    using     cc version 4.6.1 20110616 (prerelease)
    smoketime 1 hour 36 minutes (average 1 hour 36 minutes)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

  v5.15.0    Configuration (common) -Accflags="-O2 -W -Wformat=2 -Wall -Wextra -pipe -mtune=native -march=native -fomit-frame-pointer -msse2 -msse -mmmx -mfpmath=sse -D_FORTIFY_SOURCE=2 -fstack-protector -Wstack-protector -Wfloat-equal"
----------- ---------------------------------------------------------
O O - -     -Duseithreads
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio  -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio


Locally applied patches:
    uncommitted-changes
    SMOKE00b4043708e2509400eff8f5e4cb870d388854d4

Compiler messages(gcc):
try.c: In function ‘main’:
try.c:1:14: warning: unused parameter ‘argc’ [-Wunused-parameter]
try.c:1:26: warning: unused parameter ‘argv’ [-Wunused-parameter]
try.c: In function ‘blech’:
try.c:8:16: warning: unused parameter ‘s’ [-Wunused-parameter]
try.c: In function ‘blech_in_list’:
try.c:9:24: warning: unused parameter ‘s’ [-Wunused-parameter]
try.c:31:1: warning: control reaches end of non-void function [-Wreturn-type]
try.c:28:16: warning: unused parameter ‘x’ [-Wunused-parameter]
try.c:36:6: warning: ignoring return value of ‘pipe’, declared with attribute warn_unused_result [-Wunused-result]
try.c:37:6: warning: ignoring return value of ‘pipe’, declared with attribute warn_unused_result [-Wunused-result]
try.c:53:8: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
try.c:66:8: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
try.c:72:8: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
try.c:78:6: warning: ignoring return value of ‘read’, declared with attribute warn_unused_result [-Wunused-result]
try.c:8:16: warning: unused parameter ‘x’ [-Wunused-parameter]
try.c:3:15: warning: unused parameter ‘argc’ [-Wunused-parameter]
try.c:3:27: warning: unused parameter ‘argv’ [-Wunused-parameter]
try.c: In function ‘bletch’:
try.c:11:17: warning: unused parameter ‘s’ [-Wunused-parameter]
try.c:12:26: warning: unused parameter ‘argv’ [-Wunused-parameter]
try.c:52:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
try.c:4069:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4072:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4075:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4078:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4105:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4108:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4111:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4114:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4165:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4168:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4171:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4174:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4201:16: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4204:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4207:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4210:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4465:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4468:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4471:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:4474:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10249:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10252:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10255:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10258:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10285:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10288:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10291:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10294:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10321:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10324:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10327:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10330:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10357:17: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10360:18: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10363:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10366:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10585:19: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10588:20: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10591:21: warning: extra tokens at end of #ifdef directive [enabled by default]
try.c:10594:21: warning: extra tokens at end of #ifdef directive [enabled by default]
gv.c: In function ‘Perl_Gv_AMupdate’:
gv.c:1859:14: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
gv.c: In function ‘Perl_amagic_call’:
gv.c:2254:17: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
gv.c:2523:7: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
toke.c: In function ‘S_printbuf’:
toke.c:470:5: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
toke.c: In function ‘Perl_yylex’:
toke.c:6907:12: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
toke.c: In function ‘S_pending_ident’:
toke.c:8321:17: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
toke.c: In function ‘S_new_constant’:
toke.c:8558:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
toke.c: In function ‘S_missingterm’:
toke.c:566:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
regcomp.c: In function ‘S_make_trie’:
regcomp.c:1641:23: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
dquote_static.c: In function ‘S_grok_bslash_c’:
dquote_static.c:45:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
dump.c: In function ‘Perl_sv_peek’:
dump.c:480:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
dump.c:491:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
util.c: In function ‘Perl_my_strftime’:
util.c:4144:3: warning: format not a string literal, format string not checked [-Wformat-nonliteral]
util.c:4168:7: warning: format not a string literal, format string not checked [-Wformat-nonliteral]
util.c: In function ‘S_write_no_mem’:
util.c:71:5: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
mg.c: In function ‘Perl_magic_setdbline’:
mg.c:1986:19: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
mg.c: In function ‘Perl_sighandler’:
mg.c:3101:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
hv.c: In function ‘Perl_hv_common’:
hv.c:495:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c: In function ‘Perl_av_fetch’:
av.c:223:36: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c: In function ‘Perl_av_store’:
av.c:315:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c: In function ‘Perl_av_delete’:
av.c:827:28: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c: In function ‘Perl_av_exists’:
av.c:917:28: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c:940:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_hot.c: In function ‘Perl_pp_and’:
pp_hot.c:103:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_hot.c: In function ‘Perl_pp_cond_expr’:
pp_hot.c:216:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_hot.c: In function ‘Perl_pp_eq’:
pp_hot.c:409:7: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_hot.c: In function ‘Perl_pp_or’:
pp_hot.c:436:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_hot.c: In function ‘Perl_pp_grepwhile’:
pp_hot.c:2542:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘S_sv_2iuv_non_preserve’:
sv.c:1960:29: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:1969:25: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘S_sv_2iuv_common’:
sv.c:2015:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:2058:14: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:2204:41: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_2pv_flags’:
sv.c:2755:26: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:2940:16: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_2bool_flags’:
sv.c:3114:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:3133:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_magic’:
sv.c:5247:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
sv.c: In function ‘Perl_sv_inc_nomg’:
sv.c:7905:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_dec_nomg’:
sv.c:8089:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_true’:
sv.c:8946:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘S_F0convert’:
sv.c:9875:19: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_vcatpvfn’:
sv.c:10723:43: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:10867:4: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
sv.c:10868:4: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
sv.c: In function ‘Perl_sv_cat_decode’:
sv.c:13625:8: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_report_uninit’:
sv.c:14215:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
sv.c:14219:7: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
sv.c: In function ‘Perl_dirp_dup’:
sv.c:11264:11: warning: ignoring return value of ‘fchdir’, declared with attribute warn_unused_result [-Wunused-result]
sv.c:9979:7: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result]
sv.c:10817:7: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result]
sv.c:2760:3: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result]
sv.c:2949:6: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result]
pp.c: In function ‘Perl_pp_divide’:
pp.c:1568:12: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c: In function ‘Perl_pp_modulo’:
pp.c:1672:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c:1676:34: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c: In function ‘Perl_pp_ne’:
pp.c:2409:7: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c: In function ‘Perl_pp_not’:
pp.c:2735:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c: In function ‘Perl_pp_rand’:
pp.c:3164:15: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘S_varname’:
sv.c:13720:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
pp_ctl.c: In function ‘Perl_pp_formline’:
pp_ctl.c:959:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
pp_ctl.c: In function ‘Perl_pp_range’:
pp_ctl.c:1220:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_flip’:
pp_ctl.c:1249:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_flop’:
pp_ctl.c:1343:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_xor’:
pp_ctl.c:1764:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c:1764:25: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_return’:
pp_ctl.c:2331:44: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_leaveeval’:
pp_ctl.c:4134:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘S_matcher_matches_sv’:
pp_ctl.c:4349:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘S_do_smartmatch’:
pp_ctl.c:4459:22: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c:4491:22: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c:4702:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c:4763:11: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c:4834:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_enterwhen’:
pp_ctl.c:4859:52: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c: In function ‘Perl_pp_stat’:
pp_sys.c:2822:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
pp_sys.c: In function ‘S_try_amagic_ftest’:
pp_sys.c:2922:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c: In function ‘Perl_pp_ftrread’:
pp_sys.c:2979:5: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c: In function ‘Perl_pp_ftis’:
pp_sys.c:3083:5: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c: In function ‘Perl_pp_ftrowned’:
pp_sys.c:3140:5: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c: In function ‘Perl_pp_fttty’:
pp_sys.c:3258:5: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c: In function ‘Perl_pp_fttext’:
pp_sys.c:3311:5: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c:3378:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
pp_sys.c: In function ‘Perl_pp_gmtime’:
pp_sys.c:4484:11: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
doio.c: In function ‘Perl_do_openn’:
doio.c:536:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
doio.c: In function ‘Perl_my_stat_flags’:
doio.c:1326:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
doio.c: In function ‘Perl_my_lstat_flags’:
doio.c:1370:2: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
doio.c: In function ‘S_exec_failed’:
doio.c:1383:2: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
doio.c: In function ‘Perl_nextargv’:
doio.c:871:7: warning: ignoring return value of ‘fchown’, declared with attribute warn_unused_result [-Wunused-result]
regexec.c: In function ‘S_regmatch’:
regexec.c:4362:11: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
utf8.c: In function ‘Perl_swash_init’:
utf8.c:2066:7: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
utf8.c:2088:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
utf8.c: In function ‘Perl_swash_fetch’:
utf8.c:2121:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
utf8.c: In function ‘Perl__swash_to_invlist’:
utf8.c:2871:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
taint.c: In function ‘Perl_taint_proper’:
taint.c:69:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
universal.c: In function ‘Perl_sv_does’:
universal.c:176:15: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c: In function ‘XS_Internals_SvREADONLY’:
universal.c:786:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c: In function ‘XS_PerlIO_get_layers’:
universal.c:862:16: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c:868:17: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c:874:18: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c: In function ‘XS_re_regname’:
universal.c:1062:23: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c: In function ‘XS_re_regnames’:
universal.c:1095:23: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
perlio.c: In function ‘XS_PerlIO__Layer__find’:
perlio.c:995:34: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
perlio.c: In function ‘S_more_refcounted_fds’:
perlio.c:2377:2: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
perlio.c: In function ‘PerlIO_debug’:
perlio.c:510:2: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
perlio.c: In function ‘PerlIO_getc’:
perlio.c:5234:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
numeric.c: In function ‘S_mulexp10’:
numeric.c:765:15: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c: In function ‘S_amagic_ncmp’:
pp_sort.c:1891:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c: In function ‘S_amagic_i_ncmp’:
pp_sort.c:1912:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c: In function ‘S_amagic_cmp’:
pp_sort.c:1933:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c: In function ‘S_amagic_cmp_locale’:
pp_sort.c:1954:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c: In function ‘Perl_scalarvoid’:
op.c:1185:36: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c:1185:55: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c: In function ‘S_new_logop’:
op.c:5048:26: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c:5049:26: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c: In function ‘Perl_newCONDOP’:
op.c:5204:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c: In function ‘Perl_newLOOPOP’:
op.c:5345:44: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c: In function ‘Perl_newWHILEOP’:
op.c:5489:46: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
perl.c: In function ‘Perl_eval_pv’:
perl.c:2835:27: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
perl.c: In function ‘S_init_tls_and_interp’:
perl.c:105:2: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
perl.c: In function ‘S_forbid_setid’:
perl.c:3822:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
DynaLoader.c: In function ‘XS_DynaLoader_CLONE’:
DynaLoader.c:425:11: warning: unused variable ‘items’ [-Wunused-variable]
B.xs: In function ‘XS_B_walkoptree_debug’:
B.xs:742:19: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
B.xs: In function ‘XS_B__GV_FILEGV’:
B.xs:1855:2: warning: null argument where non-null required (argument 2) [-Wnonnull]
compress.c: In function ‘sendMTFValues’:
compress.c:243:19: warning: variable ‘nBytes’ set but not used [-Wunused-but-set-variable]
decompress.c: In function ‘BZ2_decompress’:
decompress.c:106:7: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
bzlib.c: In function ‘default_bzalloc’:
bzlib.c:107:31: warning: unused parameter ‘opaque’ [-Wunused-parameter]
bzlib.c: In function ‘default_bzfree’:
bzlib.c:114:29: warning: unused parameter ‘opaque’ [-Wunused-parameter]
inflate.c: In function ‘inflate’:
inflate.c:589:13: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
inflate.c: In function ‘inflateSync’:
inflate.c:1345:13: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
Zlib.c: In function ‘XS_Compress__Raw__Zlib__inflateStream_inflate’:
Zlib.c:2107:18: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Zlib.c:2082:7: warning: variable ‘eof’ set but not used [-Wunused-but-set-variable]
Zlib.c: In function ‘XS_Compress__Raw__Zlib__inflateStream_set_Append’:
Zlib.c:2743:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Zlib.c: In function ‘XS_Compress__Raw__Zlib__inflateScanStream_scan’:
Zlib.c:2920:18: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Zlib.c:2896:7: warning: variable ‘eof’ set but not used [-Wunused-but-set-variable]
Zlib.c:2895:7: warning: variable ‘out’ set but not used [-Wunused-but-set-variable]
Zlib.c: In function ‘XS_Compress__Raw__Zlib_constant’:
./constants.xs:38:11: warning: ‘iv’ may be used uninitialized in this function [-Wuninitialized]
Dumper.xs: In function ‘DD_dump’:
Dumper.xs:321:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Dumper.xs:817:6: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘U32’ [-Wformat]
Dumper.xs: In function ‘XS_Data__Dumper_Dumpxs’:
Dumper.xs:1091:15: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Dumper.xs:1113:18: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Dumper.xs:1115:19: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Dumper.xs:1122:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
DB_File.xs: In function ‘db_put’:
DB_File.xs:518:9: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
DB_File.xs: In function ‘btree_compare’:
DB_File.xs:542:20: warning: unused parameter ‘db’ [-Wunused-parameter]
DB_File.xs: In function ‘btree_prefix’:
DB_File.xs:628:19: warning: unused parameter ‘db’ [-Wunused-parameter]
DB_File.xs: In function ‘hash_cb’:
DB_File.xs:718:14: warning: unused parameter ‘db’ [-Wunused-parameter]
DB_File.xs: In function ‘db_errcall_cb’:
DB_File.xs:792:29: warning: unused parameter ‘dbenv’ [-Wunused-parameter]
DB_File.c: In function ‘XS_DB_File_DELETE’:
DB_File.c:1791:8: warning: variable ‘flags’ set but not used [-Wunused-but-set-variable]
DB_File.c: In function ‘XS_DB_File_STORE’:
DB_File.c:1988:8: warning: variable ‘flags’ set but not used [-Wunused-but-set-variable]
DB_File.xs: In function ‘boot_DB_File’:
DB_File.xs:1497:10: warning: unused variable ‘sv_err’ [-Wunused-variable]
DB_File.c: In function ‘XS_DB_File_constant’:
Peek.xs: In function ‘XS_Devel__Peek_Dump’:
Peek.xs:353:5: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Peek.xs: In function ‘XS_Devel__Peek_DumpArray’:
Peek.xs:372:2: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
MD5.xs: In function ‘XS_Digest__MD5_md5’:
MD5.xs:708:27: warning: null argument where non-null required (argument 1) [-Wnonnull]
MD5.xs:721:27: warning: null argument where non-null required (argument 1) [-Wnonnull]
RealPPPort.xs: In function ‘XS_Devel__PPPort_other_variables’:
RealPPPort.xs:405:3: warning: the comparison will always evaluate as ‘true’ for the address of ‘PL_no_modify’ will never be NULL [-Waddress]
RealPPPort.xs: In function ‘XS_Devel__PPPort_ptrtests’:
RealPPPort.xs:1094:23: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
RealPPPort.xs: In function ‘XS_Devel__PPPort_ERRSV’:
RealPPPort.xs:1190:12: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
src/sha.c: In function ‘shabase64’:
src/sha.c:459:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
src/sha.c: In function ‘encbase64’:
src/sha.c:435:13: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
src/sha.c:451:7: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
bsd_glob.c: In function ‘glob3’:
bsd_glob.c:723:28: warning: unused parameter ‘pattern_last’ [-Wunused-parameter]
bsd_glob.c: In function ‘globextend’:
bsd_glob.c:883:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Glob.xs: In function ‘boot_File__Glob’:
Glob.xs:90:5: warning: unused variable ‘my_cxtp’ [-Wunused-variable]
Encode.xs: In function ‘_encoded_utf8_to_bytes’:
Encode.xs:29:1: warning: unused parameter ‘sv’ [-Wunused-parameter]
Encode.xs:29:1: warning: unused parameter ‘encoding’ [-Wunused-parameter]
Encode.xs: In function ‘_encoded_bytes_to_utf8’:
Encode.xs:30:1: warning: unused parameter ‘sv’ [-Wunused-parameter]
Encode.xs:30:1: warning: unused parameter ‘encoding’ [-Wunused-parameter]
Encode.xs: In function ‘call_failure’:
Encode.xs:62:19: warning: unused parameter ‘routine’ [-Wunused-parameter]
Encode.xs:62:33: warning: unused parameter ‘done’ [-Wunused-parameter]
Encode.xs:62:44: warning: unused parameter ‘dest’ [-Wunused-parameter]
Encode.xs:62:55: warning: unused parameter ‘orig’ [-Wunused-parameter]
Encode.xs: In function ‘strict_utf8’:
Encode.xs:305:12: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Encode.xs: In function ‘process_utf8’:
Encode.xs:356:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Encode.xs:360:30: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Encode.c: In function ‘XS_Encode__utf8_encode_xs’:
Encode.xs:499:10: warning: unused variable ‘renewed’ [-Wunused-variable]
Encode.c: In function ‘XS_Encode__XS_renew’:
Encode.c:662:7: warning: unused variable ‘obj’ [-Wunused-variable]
Encode.c: In function ‘XS_Encode__XS_renewed’:
Encode.c:684:7: warning: unused variable ‘obj’ [-Wunused-variable]
Encode.c: In function ‘XS_Encode__XS_needs_lines’:
Encode.c:873:7: warning: unused variable ‘obj’ [-Wunused-variable]
Encode.xs: In function ‘XS_Encode__XS_perlio_ok’:
Encode.xs:682:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Encode.c:897:7: warning: unused variable ‘obj’ [-Wunused-variable]
Encode.xs: In function ‘XS_Encode__XS_mime_name’:
Encode.xs:699:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Encode.xs: In function ‘XS_Encode__utf8_to_bytes’:
Encode.xs:762:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Call.xs: In function ‘filter_call’:
Call.xs:63:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘STRLEN’ [-Wformat]
Call.xs:63:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘STRLEN’ [-Wformat]
Call.xs:100:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘STRLEN’ [-Wformat]
Call.xs:156:8: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘STRLEN’ [-Wformat]
Call.xs:175:48: warning: signed and unsigned type in conditional expression [-Wsign-compare]
Call.xs:175:14: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘STRLEN’ [-Wformat]
Call.xs:186:47: warning: signed and unsigned type in conditional expression [-Wsign-compare]
Call.c: In function ‘XS_Filter__Util__Call_unimport’:
Call.c:364:15: warning: variable ‘package’ set but not used [-Wunused-but-set-variable]
SysV.c: In function ‘XS_IPC__SysV__constant’:
./const-xs.inc:38:11: warning: ‘iv’ may be used uninitialized in this function [-Wuninitialized]
ListUtil.xs: In function ‘XS_List__Util_min’:
ListUtil.xs:159:18: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
ListUtil.xs: In function ‘XS_List__Util_reduce’:
ListUtil.xs:281:5: warning: variable ‘newsp’ set but not used [-Wunused-but-set-variable]
ListUtil.xs: In function ‘XS_List__Util_first’:
ListUtil.xs:341:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
ListUtil.xs:320:5: warning: variable ‘newsp’ set but not used [-Wunused-but-set-variable]
ListUtil.c: In function ‘XS_List__Util_min’:
ListUtil.xs:173:20: warning: ‘retval’ may be used uninitialized in this function [-Wuninitialized]
Base64.xs: In function ‘XS_MIME__QuotedPrint_encode_qp’:
Base64.xs:347:25: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Base64.c: In function ‘XS_MIME__QuotedPrint_decode_qp’:
Base64.c:565:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
Base64.c: In function ‘XS_MIME__Base64_decode_base64’:
Base64.c:258:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
Opcode.xs: In function ‘XS_Opcode__safe_pkg_prep’:
Opcode.xs:264:9: warning: null argument where non-null required (argument 1) [-Wnonnull]
encoding.xs: In function ‘PerlIOEncode_pushed’:
encoding.xs:121:51: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
encoding.xs:135:57: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
encoding.xs:144:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
via.xs: In function ‘PerlIOVia_method’:
via.xs:90:12: warning: null argument where non-null required (argument 2) [-Wnonnull]
via.xs: In function ‘PerlIOVia_pushed’:
via.xs:175:17: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
via.xs: In function ‘PerlIOVia_open’:
via.xs:247:16: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
POSIX.c: In function ‘XS_POSIX__SigSet_new’:
POSIX.c:744:15: warning: variable ‘packname’ set but not used [-Wunused-but-set-variable]
POSIX.c: In function ‘XS_POSIX__Termios_new’:
POSIX.c:985:15: warning: variable ‘packname’ set but not used [-Wunused-but-set-variable]
POSIX.xs: In function ‘XS_POSIX_sigaction’:
POSIX.xs:1414:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
POSIX.xs:1446:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
POSIX.xs:1486:4: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
POSIX.xs:541:1: warning: ‘not_here’ defined but not used [-Wunused-function]
re_exec.c: In function ‘S_regmatch’:
re_exec.c:4362:11: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
re_comp.c: In function ‘S_make_trie’:
re_comp.c:1641:23: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
re_comp.c:5928:1: warning: ‘S_invlist_extend’ defined but not used [-Wunused-function]
Unicode.xs: In function ‘XS_Encode__Unicode_decode_xs’:
Unicode.xs:175:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Unicode.xs:176:6: warning: value computed is not used [-Wunused-value]
Unicode.xs:194:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Unicode.xs: In function ‘XS_Encode__Unicode_encode_xs’:
Unicode.xs:330:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Unicode.xs:331:6: warning: value computed is not used [-Wunused-value]
Unicode.xs:346:14: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sdbm.c: In function ‘makroom’:
sdbm.c:371:2: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
SDBM_File.c: In function ‘XS_SDBM_File_NEXTKEY’:
SDBM_File.c:395:12: warning: variable ‘key’ set but not used [-Wunused-but-set-variable]
Socket.c: In function ‘XS_Socket_inet_ntop’:
Socket.xs:734:18: warning: variable ‘struct_size’ set but not used [-Wunused-but-set-variable]
Storable.xs: In function ‘store_hash’:
Storable.xs:2348:5: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Storable.xs: In function ‘store_code’:
Storable.xs:2636:4: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Storable.xs: In function ‘store_other’:
Storable.xs:3417:4: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Storable.xs: In function ‘retrieve_hook’:
Storable.xs:4099:2: warning: null argument where non-null required (argument 2) [-Wnonnull]
Storable.xs: In function ‘retrieve_code’:
Storable.xs:5419:7: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Storable.xs:5423:5: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Storable.xs:5453:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Storable.xs: In function ‘old_retrieve_array’:
Storable.xs:5504:2: warning: null argument where non-null required (argument 2) [-Wnonnull]
Storable.xs: In function ‘old_retrieve_hash’:
Storable.xs:5567:2: warning: null argument where non-null required (argument 2) [-Wnonnull]
Storable.xs: In function ‘magic_check’:
Storable.xs:5753:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Storable.xs: In function ‘retrieve’:
Storable.xs:5924:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Storable.xs:1646:12: warning: ‘is_storing’ defined but not used [-Wunused-function]
Storable.xs:1658:12: warning: ‘is_retrieving’ defined but not used [-Wunused-function]
threads.xs:391:1: warning: missing initializer [-Wmissing-field-initializers]
threads.xs:391:1: warning: (near initialization for ‘ithread_vtbl.svt_local’) [-Wmissing-field-initializers]
threads.xs: In function ‘S_ithread_run’:
threads.xs:546:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
threads.xs: In function ‘XS_threads_create’:
threads.xs:1015:25: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
threads.xs:1055:21: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
threads.xs:1059:21: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
threads.xs:1063:21: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
threads.xs:1067:21: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
threads.xs:985:22: warning: unused variable ‘num_args’ [-Wunused-variable]
threads.xs: In function ‘XS_threads_list’:
threads.xs:1127:28: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
threads.xs: In function ‘XS_threads_set_thread_exit_only’:
threads.xs:1659:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
threads.xs: In function ‘boot_threads’:
threads.xs:1754:5: warning: unused variable ‘my_cxtp’ [-Wunused-variable]
threads.c: In function ‘S_ithread_create’:
threads.xs:711:9: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
threads.xs:468:9: warning: variable ‘exit_app’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Wclobbered]
threads.xs:469:9: warning: variable ‘exit_code’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Wclobbered]
threads.xs:496:13: warning: variable ‘len’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Wclobbered]
NamedCapture.xs: In function ‘XS_Tie__Hash__NamedCapture_TIEHASH’:
NamedCapture.xs:56:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Piece.xs: In function ‘_strptime’:
Piece.xs:682:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Piece.xs:776:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Piece.xs: In function ‘our_strptime’:
Piece.xs:950:8: warning: unused variable ‘ret’ [-Wunused-variable]
Piece.xs: In function ‘XS_Time__Piece__strftime’:
Piece.xs:989:9: warning: format not a string literal, format string not checked [-Wformat-nonliteral]
Piece.xs:1004:29: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Piece.xs:1015:13: warning: format not a string literal, format string not checked [-Wformat-nonliteral]
Piece.xs:345:13: warning: ‘copyright’ defined but not used [-Wunused-variable]
Piece.xs:347:13: warning: ‘sccsid’ defined but not used [-Wunused-variable]
HiRes.c: In function ‘XS_Time__HiRes_constant’:
Collate.xs: In function ‘XS_Unicode__Collate_mk_SortKey’:
Collate.xs:443:22: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Collate.xs:445:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Collate.xs: In function ‘XS_Unicode__Collate_varCE’:
Collate.xs:570:19: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Collate.xs:595:2: warning: statement with no effect [-Wunused-value]
Collate.xs:605:2: warning: statement with no effect [-Wunused-value]
Normalize.xs: In function ‘XS_Unicode__Normalize_decompose’:
Normalize.xs:458:55: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
Normalize.c: In function ‘XS_Unicode__Normalize_isComp2nd’:
Normalize.c:1035:5: warning: unused variable ‘ix’ [-Wunused-variable]
Typemap.c: In function ‘XS_XS__Typemap_T_BOOL’:
Typemap.c:427:18: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
APItest.xs:262:1: warning: missing initializer [-Wmissing-field-initializers]
APItest.xs:262:1: warning: (near initialization for ‘rmagical_b.svt_set’) [-Wmissing-field-initializers]
APItest.xs: In function ‘THX_keyword_active’:
APItest.xs:903:18: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
APItest.xs: In function ‘filter_call’:
APItest.xs:1002:11: warning: unused variable ‘my_sv’ [-Wunused-variable]
APItest.c: In function ‘XS_XS__APItest_my_cxt_getsv’:
APItest.c:3187:19: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
APItest.xs: In function ‘XS_XS__APItest_rmagical_cast’:
APItest.xs:1898:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
APItest.c: In function ‘XS_XS__APItest_bhk_record’:
APItest.c:3625:18: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
APItest.c: In function ‘XS_XS__APItest_test_rv2cv_op_cv’:
APItest.xs:2136:16: warning: variable ‘wibble_gv’ set but not used [-Wunused-but-set-variable]
APItest.xs: In function ‘XS_XS__APItest_multicall_each’:
APItest.xs:2659:5: warning: variable ‘newsp’ set but not used [-Wunused-but-set-variable]
FastCalc.xs: In function ‘XS_Math__BigInt__FastCalc___strip_zeros’:
FastCalc.xs:165:22: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
FastCalc.xs: In function ‘XS_Math__BigInt__FastCalc__acmp’:
FastCalc.xs:393:19: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
a2py.c: In function ‘main’:
a2py.c:62:75: warning: unused parameter ‘env’ [-Wunused-parameter]
ExtTest.c: In function ‘XS_ExtTest_constant’:
ExtTest.xs:465:11: warning: ‘pv’ may be used uninitialized in this function [-Wuninitialized]
ExtTest.xs:418:6: warning: ‘iv’ may be used uninitialized in this function [-Wuninitialized]
ExtTest.xs:236:11: warning: ‘iv’ may be used uninitialized in this function [-Wuninitialized]
ExtTest.xs:217:11: warning: ‘iv’ may be used uninitialized in this function [-Wuninitialized]
XSMore.c: In function ‘XS_XSMore_nil’:
XSMore.c:355:4: warning: unused variable ‘items’ [-Wunused-variable]
XSUsage.c: In function ‘XS_XSUsage_two’:
XSUsage.c:104:5: warning: unused variable ‘ix’ [-Wunused-variable]
XSUsage.c: In function ‘XS_XSUsage_four’:
XSUsage.c:145:11: warning: unused variable ‘items’ [-Wunused-variable]

-- 
Report by Test::Smoke v1.44 build 1285 running on perl 5.12.3
(Reporter v0.035 / Smoker v0.045)